EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: MarioBros69 on August 28, 2023, 02:45:15 pm

Title: Siglent sds1202xe strange behavior
Post by: MarioBros69 on August 28, 2023, 02:45:15 pm

I had an SDS1202x-e for a couple of days and while measuring a half-wave rectifier the following occurs to me

I ask the forum experts because I don't know if this is normal behavior or a malfunction

I take the measurement in automatic and everything is correct in 5v/div
(http://[attachimg=4])

I go down to a 2v division and everything is correct
(http://[attachimg=5])

I go down to 1v dvision and the bottom of the signal is completely deformed
(http://[attachimg=6])

Title: Re: Siglent sds1202xe strange behavior
Post by: MarioBros69 on August 28, 2023, 08:41:36 pm

Thanks... that's exactly what happened to me