Products > Test Equipment
Siglent SDS1104X-E and SDS1204X-E Mixed Signal Oscilloscopes
orzel:
--- Quote from: tautech on February 12, 2024, 12:16:53 am ---As I recall the 8 signifies the product line or maybe UI type and 1 is the OS version.
Not all get 8.3 displayed after installing with some displaying 8.2 but V3 OS can be confirmed installed correctly if you have the Logging or NTP feature working correctly.
--- End quote ---
Ok, so it's really messy, no wonder i was lost. Thanks for clarifying somehow !
tautech:
--- Quote from: orzel on February 12, 2024, 12:28:34 am ---
--- Quote from: tautech on February 12, 2024, 12:16:53 am ---As I recall the 8 signifies the product line or maybe UI type and 1 is the OS version.
Not all get 8.3 displayed after installing with some displaying 8.2 but V3 OS can be confirmed installed correctly if you have the Logging or NTP feature working correctly.
--- End quote ---
Ok, so it's really messy, no wonder i was lost. Thanks for clarifying somehow !
--- End quote ---
Not exactly sure why this is but I suspect production was installing V2 OS and labelling it as the very early V1.
Some I installed only displayed V2 however the NTP feature worked as it should....we enter the NZ NTP server URL before dispatch too.
rf-loop:
There have been now 4 versions. V0, V1, V2 and now V3
Afaik V3 do not add anything (visible to user) over V2 in HW version below 09.
V3 is for support some changes on hardware (hardware version 09-xx)
It is also told in OS revision history: If your HW version is below 09-xx you do not need update to V3
Bit difficult to understand why peoples try update to V3 if they have HW version below 09-xx
With other words: If your HW version is below 09-xx) do not update to V3. (If you still try, nothing happens but you waste time - remember that it is a non-renewable resource at the personal level)
orzel:
--- Quote from: rf-loop on February 12, 2024, 04:50:36 am ---With other words: If your HW version is below 09-xx) do not update to V3. (If you still try, nothing happens but you waste time - remember that it is a non-renewable resource at the personal level)
--- End quote ---
This is crystal clear from the update document. Still people from v0 or v1 will probably want to update to the latest version, and wont waste more time doing so.
And it's really fast anyway, worth few minutes including download, putting on usb key and reboot of scope.
ironcurtain:
My SDS1204X-E is running SW 6.1.37R2, UBoot-OS 7.1, FPGA version 2021-07-12, HW version is 01-03. It has all the options (permanent licenses).
Anyone had issues upgrading to the newer versions?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version