Products > Test Equipment
Siglent SDS2000X-E
<< < (6/13) > >>
colorado.rob:

--- Quote from: tautech on December 11, 2018, 03:39:41 am ---Check:
Read Waveform Data of Digital Example
P251
Will that work for you ?

--- End quote ---

Does that work for you on a 2000X?

For me

    scope.write("d1: wf? dat2")
    data = scope.read_raw()

(reading a digital channel waveform) has no obvious effect on the scope and just hangs the script, whereas

    scope.write("c1: wf? dat2")
    data = scope.read_raw()

(reading an analog channel waveform) works as expected, stopping the scope and returning a chunk of binary data.
tautech:

--- Quote from: colorado.rob on December 11, 2018, 04:47:29 am ---
--- Quote from: tautech on December 11, 2018, 03:39:41 am ---Check:
Read Waveform Data of Digital Example
P251
Will that work for you ?

--- End quote ---

Does that work for you on a 2000X?

--- End quote ---
Sold mine.  :(
(Replacing with a SDS5kX soon  ;) )

Ok thanks for that info and code, I'll look into it.
blacksheeplogic:

--- Quote from: tautech on December 11, 2018, 03:28:50 am ---It's in the datasheet: P3 and 14.
Maximum waveform capture rate up to 1GSa/s, Record length up to 14 Mpts/CH
https://www.siglentamerica.com/wp-content/uploads/2018/12/SDS2000X-E_DataSheet_DS0102E-E01A.pdf

The 16 digital channels are provided with an external module, the same as used for SDS1004X-E models, the SLA1016 that connects into the front Sbus connector.
https://www.siglentamerica.com/accessory/sla1016/

--- End quote ---

Thanks you. I'm considering something like this as a second MSO.
tautech:

--- Quote from: blacksheeplogic on December 11, 2018, 06:26:55 am ---
--- Quote from: tautech on December 11, 2018, 03:28:50 am ---It's in the datasheet: P3 and 14.
Maximum waveform capture rate up to 1GSa/s, Record length up to 14 Mpts/CH
https://www.siglentamerica.com/wp-content/uploads/2018/12/SDS2000X-E_DataSheet_DS0102E-E01A.pdf

The 16 digital channels are provided with an external module, the same as used for SDS1004X-E models, the SLA1016 that connects into the front Sbus connector.
https://www.siglentamerica.com/accessory/sla1016/

--- End quote ---

Thanks you. I'm considering something like this as a second MSO.

--- End quote ---
20 days lead times means I'll have some by early Feb, let me know if you want to demo one.
MrW0lf:
Comparing new X-E to my other scopes... 100MHz square from Leo's SMA EXT trigger 40ps pulser. There is SMA => BNC adapter which may degrade fidelity somewhat. No attenuator.

SDS2352X-E 350MHz scope native 50Ω @ 2GSa/s


100MHz scope 50Ω passthru @ 1GSa/s


500MHz scope native 50Ω @ 2.5GSa/s


Might try later with less aggressive signals and supplied probe. If someone has specific request what to test can try. No point to make review as such because it's just as other X-E's only much faster.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod