Products > Test Equipment
Siglent SDS2000X-E
<< < (12/13) > >>
Rapto:

--- Quote from: RoV on July 18, 2022, 08:59:08 pm ---
--- Quote from: RoV on September 25, 2021, 10:34:40 pm ---Successfully applied hack to transform the SDS2202X-E to 2352X-E, thanks to information in the blog!

--- End quote ---

After PM from one user, I realized that a detailed upgrade procedure wasn't available. So I am attaching a suitable Python 3 script, containing instructions.  :popcorn:
I used only '300' option.


--- End quote ---
Hi, thanks for the script.
So you used the "300M" option to get the upgrade to 2352X-E with 350MHz bandwidth?
If possible, could you check what your scope is displaying as "Product Type" in (press Utility button) > "System Status" menu after applying this patch?
What is the model reported by *IDN? SCPI command?

Thank you!
RoV:

--- Quote from: Rapto on August 25, 2022, 10:43:24 am ---So you used the "300M" option to get the upgrade to 2352X-E with 350MHz bandwidth?
If possible, could you check what your scope is displaying as "Product Type" in (press Utility button) > "System Status" menu after applying this patch?
What is the model reported by *IDN? SCPI command?

--- End quote ---

Yes, 300M.
See attachments  ;)
Rapto:
Thank you, that's very helpful. I made a silly mistake of using the code for "350M"  :palm: and now the scope has a blank field in place of its Product Type. Huh.... I wonder if it's possible to remove a license code...
RoV:

--- Quote from: Rapto on August 26, 2022, 03:27:22 pm ---Thank you, that's very helpful. I made a silly mistake of using the code for "350M"  :palm: and now the scope has a blank field in place of its Product Type. Huh.... I wonder if it's possible to remove a license code...

--- End quote ---

No need, just insert the correct code. Only one remains enabled.
Rapto:
Thank you very much!   ^-^
Submitting a new code indeed worked and now my scope also reports SDS2352X-E - the upgrade seems to be successful.
For potential future readers of this thread, my config was:
Software Version: 1.1.19 R5
Uboot-OS version: 2.1
FPGA Version: 2019-08-12
Hardware version: 00-01
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod