Products > Test Equipment
Siglent SDS1000(X) / SDS2000(X) or LeCroy WaveAce (Blackfin) hacks?
<< < (15/19) > >>
swperk:
Okay, thanks for the clarification! Anyway, without doing any hardware mods my SDS2204X has a -3 dB bandwidth of about 320 MHz. Maybe I'll just leave well enough alone!

Regards,
Stan
markus_jlrb:
@Stan,

have you measured your max-BW with 50 Ohm termination?

Markus
swperk:
Yes, the 320 MHz -3 dB bandwidth I measured was with a 50 ohm termination.
timber23:
Hi,

I want to optain a memdump. Therefore I used EasyScopeX to send the SCPI command "SHELLCMD telnetd -l/bin/sh -p10101". But nothing happens. I try to use PuTTy to telnet into the SDS2104X but telnet doesn't work.

Do you have any suggestions how to do it? The scope has version 1.2.2.2 R15

Best regards
Andreas
tv84:
SDS X is a Blackfin machine. No ARM and no linux OS.

No telnet is possible.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod