Products > Test Equipment

Siglent SDS1000(X) / SDS2000(X) or LeCroy WaveAce (Blackfin) hacks?

<< < (15/19) > >>

swperk:
Okay, thanks for the clarification! Anyway, without doing any hardware mods my SDS2204X has a -3 dB bandwidth of about 320 MHz. Maybe I'll just leave well enough alone!

Regards,
Stan

markus_jlrb:
@Stan,

have you measured your max-BW with 50 Ohm termination?

Markus

swperk:
Yes, the 320 MHz -3 dB bandwidth I measured was with a 50 ohm termination.

timber23:
Hi,

I want to optain a memdump. Therefore I used EasyScopeX to send the SCPI command "SHELLCMD telnetd -l/bin/sh -p10101". But nothing happens. I try to use PuTTy to telnet into the SDS2104X but telnet doesn't work.

Do you have any suggestions how to do it? The scope has version 1.2.2.2 R15

Best regards
Andreas

tv84:
SDS X is a Blackfin machine. No ARM and no linux OS.

No telnet is possible.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod