Products > Test Equipment

Siglent SDS2000X HD, missing Features and Bugs

<< < (62/76) > >>

Grandchuck:
The oscilloscope locked up in digital mode.  Nothing worked/responded ... including the on/off button.  The web browser still displayed the instrument, but no response was possible there either.  A power recycle using the AC line cord restored normal operation. 

The lockup was caused by (I think) setting the CAN signal source to CAN_H - CAN_L.

kripton2035:
if you try to connect with sigrok the interface is stuck too... only force restart is then working.

Grandchuck:
A new bug appeared.  No mouse?  Tried all the usual things.  No mouse (no pointer on the screen either).  Front panel power cycling did not work but a power cord disconnect and reconnect did.  Back in business :-+

Martin72:
I had the scope for 1.5 years and had no problems of this kind during that time.
However, I had used a mouse maybe 2 or 3 times during that time.

Grandchuck:

--- Quote from: Martin72 on February 21, 2024, 10:45:43 pm ---I had the scope for 1.5 years and had no problems of this kind during that time.
However, I had used a mouse maybe 2 or 3 times during that time.

--- End quote ---
It is interesting how we all work differently.  I use the mouse constantly.
The scope is going to be connected via its own power strip with an on/off switch in anticipation of more lockups in the future.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod