Products > Test Equipment

Siglent SDS2000X HD, missing Features and Bugs

<< < (71/76) > >>

2N3055:

--- Quote from: Ulrich.G on June 25, 2024, 01:50:31 pm ---
--- Quote from: 2N3055 on June 25, 2024, 01:40:59 pm ---Currently selected one?

--- End quote ---

That would make sense, but no - its not possible to select any data channel. The channels are having a fixed (configurable) distance to each other in vertical direction, its not possible to move them separetely.

--- End quote ---

With vertical voltage knob you can select which one is red and with vertical position knob you can move it's order... Reorganize numbers so to speak... So you "grab" No1 and move it between No5 and 6

Ulrich.G:

--- Quote from: 2N3055 on June 25, 2024, 01:55:58 pm ---With vertical voltage knob you can select which one is red and with vertical position knob you can move it's order... Reorganize numbers so to speak... So you "grab" No1 and move it between No5 and 6

--- End quote ---

You figured that out just by playing with the controls??

It's not very intuitive, that the channel selection is not possible by mouse click...

Thats amazing - THANK YOU!!

Ulrich.G:

--- Quote from: 2N3055 on June 25, 2024, 01:55:58 pm ---With vertical voltage knob you can select which one is red and with vertical position knob you can move it's order... Reorganize numbers so to speak... So you "grab" No1 and move it between No5 and 6

--- End quote ---

And pressing the position knob resets the D0-D15 order again...

2N3055:
This behaviour is similar to Keysight.... So I just tried to do the same thing...

One more thing: if you touch a Digital icon on bottom of the screen, there you can set position and distance between the channels...

fredo_:

--- Quote from: colorado.rob on November 16, 2022, 02:32:30 pm ---
--- Quote from: Martin72 on November 12, 2022, 06:53:19 pm ---Here a wish, siglent can fulfill when they´re having nothing else to do or lost a bet or got a apprentice who needs a task... :D 8)
Decoder-feature:
Decoding of IR-transmitting codes, Like RC-5 and others for checking functionality of remote controls.

--- End quote ---
Add support for the SDS2000X HD to Sigrok.
https://sigrok.org/wiki/Protocol_decoders
https://sigrok.org/wiki/PulseView
You can do this with any of the existing supported scopes.

--- End quote ---
Done ! : https://www.eevblog.com/forum/testgear/new-sigrokpulseview-hardware-support-(siglent-sds-hd-rigol-dho800-)/

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod