Products > Test Equipment

Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests

<< < (152/206) > >>

Martin72:
Test it:

Frequency range, source and DUT channels remains, also the amount of measure points and lin./dec.
Load and trace visibility not, maybe more, which is not noticeable in my setup.

KungFuJosh:

--- Quote from: Martin72 on June 18, 2023, 05:00:26 pm ---Test it:

Frequency range, source and DUT channels remains, also the amount of measure points and lin./dec.
Load and trace visibility not, maybe more, which is not noticeable in my setup.

--- End quote ---

That stuff stays. Trace visibility doesn't. I only notice because I disable the phase trace, but it always comes back. The single/continuous thing is more annoying than that though. Doing 80/dec takes long enough for a single plot.

They get most of it to stay, but it' snot enough. 😉

KungFuJosh:
There's another feature I'm assuming isn't available yet:

I'd like to be able to compare 2 or 3 different single sweep bode plots on screen at once.
Like this:


I hope it might be possible if the data is saved to the USB stick for the 2 or 3 plots, and then they can be loaded and compared on screen. If not, is there a non-Photoshop way people are doing this?

tautech:

--- Quote from: KungFuJosh on June 19, 2023, 03:20:29 am ---There's another feature I'm assuming isn't available yet:

I'd like to be able to compare 2 or 3 different single sweep bode plots on screen at once.
Like this:


I hope it might be possible if the data is saved to the USB stick for the 2 or 3 plots, and then they can be loaded and compared on screen. If not, is there a non-Photoshop way people are doing this?

--- End quote ---
Try using the Reference waveform feature.
It's in the Save/Recall menu where you can name and save several, internally and externally.

Maybe best you have a play with it in normal scope mode to get the hang of it before trying it with a Bode plot.  ;)

rf-loop:

--- Quote from: KungFuJosh on June 19, 2023, 03:20:29 am ---There's another feature I'm assuming isn't available yet:

I'd like to be able to compare 2 or 3 different single sweep bode plots on screen at once.
Like this:


I hope it might be possible if the data is saved to the USB stick for the 2 or 3 plots, and then they can be loaded and compared on screen. If not, is there a non-Photoshop way people are doing this?

--- End quote ---

No need do photo editing for this.

Bode Plot heart is one data table what it produce during sweep. What it display is then "secondary" feature based to this table.
All what BodePlot do and display is based to this single table. (also what goes out of BodePlot vertical display area all is still there in table.)

You can save this data table to USB and you can also recall it back to oscilloscope BodePlot for look and analyze it later. But it only handles one table at a time.

It need heavy changes to whole BodePlot for make this kind of function you like si that it can simultaneously keep many tables and display all these for compare. Also data tables parameters for compare need be comparable.
 
Naturally there is other way than Photo editing.
 
BodePlot data table is normal simple CSV file (also BodePlot display is just draw from this table).
You can do what ever with these data tables. Something example as Exel or LibreOffice etc can use for this.
Just if you want compare two bode plot sweep. Save both tables to USB.
Copypaste these data fields you are interested to new .CSV table and let LibreOffice or Exel draw these traces and visually compare or do what ever math using these data. It is very easy to do.
Ones you make this and save some settings already for next use then next time is more easy and fast. (or write tiny simple sw what can do it)

Here is one random BodePlot table so that all readers can imagine what it is in practice.
Note that CSV file every lines end is LF alone. Not CR LF. So if you open it using conventional old "Notepad" it is not nice to look.

Because in this forum .CSV attachments are forbidden (really unbelievable stupid rule) load it and remove file type .txt  then it is .csv.
(also you can open it using Notepad++ what is light year ahead this ancient MS Notebad...aka Notepad)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod