Products > Test Equipment

Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests

<< < (171/206) > >>

tautech:

--- Quote from: Slartibartfast on December 03, 2023, 08:08:52 pm ---Wondering if this is a bug in the I2C decoder.

--- End quote ---
BTW, please state firmware version in use.

tautech:

--- Quote from: ebastler on December 03, 2023, 10:03:00 pm ---But acquisition is stopped. The data signal is right there with all the bits, and a clean-looking clock too. Why can't it be decoded? I also fail to see how triggering could get in the way.

--- End quote ---
If it need be Stop'ed, Trigger or some other decode setting are not optimal.

ebastler:

--- Quote from: tautech on December 03, 2023, 10:17:05 pm ---
--- Quote from: ebastler on December 03, 2023, 10:03:00 pm ---But acquisition is stopped. The data signal is right there with all the bits, and a clean-looking clock too. Why can't it be decoded? I also fail to see how triggering could get in the way.

--- End quote ---
If it need be Stop'ed, Trigger or some other decode setting are not optimal.

--- End quote ---

... or you might just admit that you misunderstood the problem and gave irrelevant advice. Happens to the best of us... ::)

We don't know if it had to be stopped to decode at all, or was just stopped to take the screenshot. And in any case, tweaking the triggering will not help because there is apparently another issue, which was shown to cause decoding problems even when triggering is taken out of the game entirely.

tautech:

--- Quote from: ebastler on December 03, 2023, 10:29:29 pm ---
--- Quote from: tautech on December 03, 2023, 10:17:05 pm ---
--- Quote from: ebastler on December 03, 2023, 10:03:00 pm ---But acquisition is stopped. The data signal is right there with all the bits, and a clean-looking clock too. Why can't it be decoded? I also fail to see how triggering could get in the way.

--- End quote ---
If it need be Stop'ed, Trigger or some other decode setting are not optimal.

--- End quote ---

... or you might just admit that you misunderstood the problem and gave irrelevant advice. Happens to the best of us... ::)

We don't know if it had to be stopped to decode at all, or was just stopped to take the screenshot. And in any case, tweaking the triggering will not help because there is apparently another issue, which was shown to cause decoding problems even when triggering is taken out of the game entirely.

--- End quote ---
Yes well I am considering getting a 2kX Plus out and showing results......
First we need see which FW was being used.  :popcorn:

Martin72:
I currently have a Plus model in the house, but my STB-3 board is still a bit buggy when it comes to I²C decoding. ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod