Products > Test Equipment
Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests
tautech:
--- Quote from: smallfreak on February 12, 2024, 12:03:13 am ---I found a weird behaviour today saving images.
First I plugged in an USB stick and it was commented something like "stick found".
Upon pressing the "print" I was reminded that the image was saved. Each time, it incremented the name by one.
After the session I took out the stick to read the images on the PC, but there was nothing on it. So probably it saved to "internal". Back to the scope, there were no images in the internal memory either. Just to be sure, I took another one and it showed up as the one and only in the internal memory.
As I wanted to move this to the USB stick, that I again placed into the connector, I found that it had not been recognized at all. No "external". I tried with several sticks - none of them are recognized anymore, although they are good at the PC.
Did I break something? Can I convince the scope to at least format one? Do I have to prepare on specially to get it recognized again?
I'm a little confused. This has been working before. :-//
--- End quote ---
Do you have the USB stick formatted FAT32 and preferably 4k clusters ?
Try a reboot.
--- Quote ---I just glimpsed at the firmware page, the latest one is still SDS2000X Plus_V1.5.2R3_EN.zip?
--- End quote ---
Yep still the current version however V1.6.2 is with beta testers.
tautech:
--- Quote from: tautech on February 12, 2024, 12:22:58 am ---
--- Quote from: smallfreak on February 12, 2024, 12:03:13 am ---I just glimpsed at the firmware page, the latest one is still SDS2000X Plus_V1.5.2R3_EN.zip?
--- End quote ---
Yep still the current version however V1.6.2 is with beta testers.
--- End quote ---
Played with V1.6.2 last night and some cool things have been added.....can't wait for it to go public.
One little teaser screenshot....teaser I said and replaced with another....
hpw:
As an E02A documentation update request for the "How to Extract Data from Binary File..."
Did just used a hex editor to analyze the content of a 32M file and found the following:
- Version is already Version 4, as on manual page 37 only mentioned for SDS200X HD after 0.9.6 & SDS5000X & SDS 6000 after 1.4.1.0
- the starting of data is located at 0x1000
- the data is as word offset binary (16 bit values)
Example as using the extract tool to get the decimal text values from the csv file
Data on Bin Text on csv file
33600 1.08E-04
33600 1.08E-04
33408 8.33E-05
33472 9.17E-05
33600 1.08E-04
33600 1.08E-04
33472 9.17E-05
33600 1.08E-04
- there is some complete false: Convert the Data to Voltage
Formula on page 46: voltage = (data-128) * ch_volt_div_val /1000/code_per_div + ch_vert_offset
as this formula is for 8 bit data as data-128
- In addition the mystery: Code_per_div is 25 as mention for SDS1000 & SDS2000X... so for the binray offset is this still valid?
And updated Version 4 documentation or corrected calculations are welcome...
Hp
maxspb69:
I would like to believe that colored digital channels are not the only significant innovation in 1.6.2. ;D ;D ;D
tautech:
--- Quote from: maxspb69 on February 12, 2024, 08:24:56 pm ---I would like to believe that colored channels are not the only significant innovation in 1.6.2.
--- End quote ---
It's not, the Fade saved file feature already in some other models is also added.
So far we have not seen release notes but they will come at public release. ;)
Sorry you missed the previous teaser showing a Serial coms tester.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version