Products > Test Equipment

Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests

<< < (184/206) > >>

Antonio90:
I might, but this kind of sales rarely turn into a better offer than getting the scope without VAT.

hpw:
As using latest given FW.

Now getting repeated DSO hangings as saving a BIN file to external USB Stick. Error checking the USB did not showed any errors.  :palm:

Is this known? Or any chance to the the upcoming FW?


Some more about the culprit:

- I set the probe as 0.10 as 20dB gain given from the amplifier.... and this causes to crash after certain samples. This means, NOT fully written 1Gs & 100M-samples and as stopped on 5% indication.
  In other situation it looks as OK, even 0.1 probe value. So may a math issue  :-DD

- Setting the probe as 1:1 works

Update:

Getting repeated hangup's, I used FFT & 4x AVG as always on and C2 channel as Hide & 10ms & 1G/s to save 100M samples to a folder on the USB stick.

What works now after:

- Formatted 16G USB stick on Win10 as 4k & FAT32

- Did a DSO calibration

- Saved now to any folders using C2 channel on as 0.1x probe settings (gain of amplifier) and FFT OFF
 

Hp






maxspb69:
firmware 1.6.2R1 was released today!  :-+

smallfreak:
Has anyone seen documentation for the new "Serial Signal Test"?


--- Quote ---3/28/2024     1.6.2R1

   1. Added new Analysis function: Serial Signal Test (Analysis | Serial Signal Test)
   2 .Optimized UI
   3. Supported USB-GPIB adapter
   4. Fixed several bugs
        a) "Bended" / "tilted" trace at small V/div
        b) Math: Filter sample rate adaption cannot work
        c) Frequency / Period measurements fail on certain waveforms
--- End quote ---

2N3055:

--- Quote from: smallfreak on April 02, 2024, 03:24:20 pm ---Has anyone seen documentation for the new "Serial Signal Test"?


--- Quote ---3/28/2024     1.6.2R1

   1. Added new Analysis function: Serial Signal Test (Analysis | Serial Signal Test)
   2 .Optimized UI
   3. Supported USB-GPIB adapter
   4. Fixed several bugs
        a) "Bended" / "tilted" trace at small V/div
        b) Math: Filter sample rate adaption cannot work
        c) Frequency / Period measurements fail on certain waveforms
--- End quote ---

--- End quote ---

Not in the doc yet AFAIK...
That is brand spanking new feature right from the oven.....
I don't have SDS2000X+.
What protocols are supported : I2C and SPI ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod