Products > Test Equipment

Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests

<< < (187/206) > >>

hpw:

--- Quote from: tautech on April 02, 2024, 09:30:07 pm ---
--- Quote from: hpw on April 02, 2024, 09:23:03 pm ---
--- Quote from: Mahagam on April 02, 2024, 08:05:43 pm ---Small changes in FFT. Now log10/linear

--- End quote ---

Yes, this is nice

as it gets, was looking for any colors changing. Look at given pic's dark yellow text and lighter yellow line... so hard to see about the freq. axis values

--- End quote ---
Change your Scale or Ref level.  :P

--- End quote ---

Sometimes it is prefered to keep the full scale as to track the progress.

As only 20dB/div maximum scale possible, not any 25...30..40..50 given O:((

Now on print png, the text gets now some white/blue collor while saving.

smallfreak:

--- Quote from: hpw on April 03, 2024, 09:48:51 am ---Now on print png, the text gets now some white/blue collor while saving.

--- End quote ---

Do you have an example? The PNG should look just as the screen. Happening with the "print" button, or via web interface?

hpw:

--- Quote from: smallfreak on April 03, 2024, 10:06:15 am ---
--- Quote from: hpw on April 03, 2024, 09:48:51 am ---Now on print png, the text gets now some white/blue collor while saving.

--- End quote ---

Do you have an example? The PNG should look just as the screen. Happening with the "print" button, or via web interface?

--- End quote ---

As I told you, the axis x/y text gets this color while saving in progress. Only at that time and then come back to normal.

In addition, you will see scope & FFT axis X/Y color as quasi nor readable while it is NOT POSSIBLE to alter those line or axis colors.

So the request is simple  :-DD:

- lets modify the colors as all SW allow this  :-+
- add 25/30/40/50 dB/div  :-+
- may as simple wish, to add scale dBV/rthz as a simple task  :-+
 

2N3055:

--- Quote from: hpw on April 03, 2024, 09:48:51 am ---
--- Quote from: tautech on April 02, 2024, 09:30:07 pm ---
--- Quote from: hpw on April 02, 2024, 09:23:03 pm ---
--- Quote from: Mahagam on April 02, 2024, 08:05:43 pm ---Small changes in FFT. Now log10/linear

--- End quote ---

Yes, this is nice

as it gets, was looking for any colors changing. Look at given pic's dark yellow text and lighter yellow line... so hard to see about the freq. axis values

--- End quote ---
Change your Scale or Ref level.  :P

--- End quote ---

Sometimes it is prefered to keep the full scale as to track the progress.

As only 20dB/div maximum scale possible, not any 25...30..40..50 given O:((

Now on print png, the text gets now some white/blue collor while saving.

--- End quote ---

What would be the purpose of 50dB/div ??

You think any system in the universe have 400dB instantaneous dynamic range?
On a 8 bit scope?

hpw:
well, 50dB for a 4..5 x 50dB as 200..250dB full range as my pictures shows up.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod