Products > Test Equipment
Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests
<< < (188/206) > >>
hpw:

One more wish:

- add the used FFT Window to the BIN file, so we know later on, what FFT Window has been used

- may add better performing FFT Window functions as BH7

2N3055:

--- Quote from: hpw on April 03, 2024, 11:12:36 am ---well, 50dB for a 4..5 x 50dB as 200..250dB full range as my pictures shows up.

--- End quote ---

FFT has 8 vertical divisions. 8*50=400

You can also use split window.
KungFuJosh:

--- Quote from: hpw on April 03, 2024, 10:37:56 am ---As I told you, the axis x/y text gets this color while saving in progress. Only at that time and then come back to normal.

--- End quote ---

Are you complaining about the colors in your screenshot being inverted? That's a setting.
hpw:

--- Quote from: 2N3055 on April 03, 2024, 11:21:01 am ---
--- Quote from: hpw on April 03, 2024, 11:12:36 am ---well, 50dB for a 4..5 x 50dB as 200..250dB full range as my pictures shows up.

--- End quote ---

FFT has 8 vertical divisions. 8*50=400

You can also use split window.

--- End quote ---

Look, the probe gain supports +1E6 to -1E6 so we get +/- 120dB  ... so for 8 x 20dB Grid there is not much room left
hpw:

About the color thing: this is possible and in the latest given documented.

To setup / change the colors:

[1] >> Display menu... then on the right go down until this settings sub menu entry is visible.

[2] only Math F1 or F2 as for line and axis text.

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod