Products > Test Equipment
Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests
hpw:
One more wish:
- add the used FFT Window to the BIN file, so we know later on, what FFT Window has been used
- may add better performing FFT Window functions as BH7
2N3055:
--- Quote from: hpw on April 03, 2024, 11:12:36 am ---well, 50dB for a 4..5 x 50dB as 200..250dB full range as my pictures shows up.
--- End quote ---
FFT has 8 vertical divisions. 8*50=400
You can also use split window.
KungFuJosh:
--- Quote from: hpw on April 03, 2024, 10:37:56 am ---As I told you, the axis x/y text gets this color while saving in progress. Only at that time and then come back to normal.
--- End quote ---
Are you complaining about the colors in your screenshot being inverted? That's a setting.
hpw:
--- Quote from: 2N3055 on April 03, 2024, 11:21:01 am ---
--- Quote from: hpw on April 03, 2024, 11:12:36 am ---well, 50dB for a 4..5 x 50dB as 200..250dB full range as my pictures shows up.
--- End quote ---
FFT has 8 vertical divisions. 8*50=400
You can also use split window.
--- End quote ---
Look, the probe gain supports +1E6 to -1E6 so we get +/- 120dB ... so for 8 x 20dB Grid there is not much room left
hpw:
About the color thing: this is possible and in the latest given documented.
To setup / change the colors:
[1] >> Display menu... then on the right go down until this settings sub menu entry is visible.
[2] only Math F1 or F2 as for line and axis text.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version