Products > Test Equipment
Siglent SDS2000X Plus - Bugs / Missing Features / Feature Requests
BitBangingBytes:
Didn’t try that
smallfreak:
--- Quote from: BitBangingBytes on April 11, 2024, 05:10:32 pm ---Yea, I was closely reading Siglent’s directions last night…
--- End quote ---
I always wondered how rocket scientists are able recover their gadget a zillion miles away, when it choked on the last command, wrecked the antenna and drained the batteries.
If designed carefully, there is always another Plan-C, bypass, backdoor and spare circuit that can jump in
.
:-+
KungFuJosh:
There's a minor repeatable bug in 1.6.2r1.
After being in XY mode, exiting XY mode enables the digital channels on screen.
This hasn't happened in every instance, but it happens for me when I've been in XY for a while, and/maybe or when the scope is powered on in XY mode.
2N3055:
--- Quote from: KungFuJosh on April 18, 2024, 08:52:36 pm ---There's a minor repeatable bug in 1.6.2r1.
After being in XY mode, exiting XY mode enables the digital channels on screen.
This hasn't happened in every instance, but it happens for me when I've been in XY for a while, and/maybe or when the scope is powered on in XY mode.
--- End quote ---
When powered in X-Y and then you exit.
Already reported... 8)
martin1959:
--- Quote from: maxspb69 on February 23, 2024, 08:43:01 am ---
--- Quote from: mathstudi on February 22, 2024, 09:40:18 pm ---Has anyone tested the SigScopeLab software with an SDS2000X Plus?
--- End quote ---
I tried using this software.
Unfortunately, it does not work correctly with SDS2000X+. The timebase is not set correctly, it is in the range from 5 sec/div to 1 sec/div, regardless of what you set from PC. Maybe with the new firmware (when it released) the situation will improve, but for now this software useless for SDS2000X+ owners.
--- End quote ---
I had same problem using it on my Windows 10 PC which had the language and date/number format set to "German" (i.e. using comma "," as decimal separator). After changing Windows settings to use dot "." as decimal separator, as used in USA, the timebase settings were applied correctly. Maybe this helps.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version