Author Topic: Siglent SDS2000X Plus Hack (Read 156401 times)

Elasia · « **Reply #25 on:** June 02, 2020, 01:15:45 pm »

I'll open my 100Mhz base model and take pics of the front end you can use

Elasia · « **Reply #26 on:** June 02, 2020, 08:13:57 pm »

The base model is the same front end with the main board also with matching version codes / population

I did try to get to the other side as well but that proved to be a real pain in the ass so i changed my mind lol

Martin72 · « **Reply #27 on:** June 02, 2020, 08:17:42 pm »

Wasn´t a surprise for me as I got the 500Mhz hack on my sds2104X+...

jemangedeslolos · « **Reply #28 on:** June 02, 2020, 08:35:04 pm »

They know they will sell a lot more 2104X Plus than 2204XPlus and nobody will buy a 2304X,its almost the same price than the SDS5034X.
Its simpler to have only one hardware.

Frex · « **Reply #29 on:** June 03, 2020, 04:21:24 pm »

Hi,

Mine (a 2104x-plus) stay as SDS2354X-plus (350MHz) when using 500M option key.
I tried again, but same... $:-\$

Frex

Elasia · « **Reply #30 on:** June 03, 2020, 04:38:33 pm »

Quote from: Frex on June 03, 2020, 04:21:24 pm

Hi,

Mine (a 2104x-plus) stay as SDS2354X-plus (350MHz) when using 500M option key.
I tried again, but same... $:-\$

Frex

You might want to open it up and see if the board is the same rev / same population of parts.. been some debate about these odd cases

stafil · « **Reply #31 on:** June 03, 2020, 06:19:13 pm »

Quote from: Frex on June 03, 2020, 04:21:24 pm

Hi,

Mine (a 2104x-plus) stay as SDS2354X-plus (350MHz) when using 500M option key.
I tried again, but same... $:-\$

Frex

Same here

Martin72 · « **Reply #32 on:** June 03, 2020, 07:39:55 pm »

Quote from: Frex on June 03, 2020, 04:21:24 pm

Hi,

Mine (a 2104x-plus) stay as SDS2354X-plus (350MHz) when using 500M option key.
I tried again, but same... $:-\$

Frex

Only what the annotation in the system info box concerns.

tv84 · « **Reply #33 on:** June 03, 2020, 08:59:32 pm »

Quote from: Martin72 on June 03, 2020, 07:39:55 pm

Only what the annotation in the system info box concerns.

I will solve that question next so that you can all get some sleep!

Martin72 · « **Reply #34 on:** June 03, 2020, 09:02:03 pm »

Martin72 · « **Reply #35 on:** June 06, 2020, 08:44:59 pm »

I was curious about the keygen in the first post and try it out just for fun ( my scope was unlocked "long" before), Input the scop id and press "Run".
And...
The keys are indentical to mine, nice thing.
May be nothing special to notice for others, but for me who didn´t have any knowledge in the programming/hacking things, it´s pure magic...

tv84 · « **Reply #36 on:** June 06, 2020, 08:49:47 pm »

It's basically Clarke's 3rd law in motion.

"Any sufficiently advanced technology is indistinguishable from magic."

THD · « **Reply #37 on:** June 07, 2020, 12:06:40 pm »

Hi

Long time reader, first time poster.

I've just received an SDS2104X Plus and done the dance to "upgrade" it to 500MHz (Thanks to those responsible for the method!). I've also entered keys for all remaining functions. This has worked fine except for the option ending _FG. In the key gen there is no reference to FG but there is reference to AWG. It seems no matter which key I try I can't get the _FG function unlocked.

I'm sure it's obvious, but what am I missing ?

Thanks

THD · « **Reply #38 on:** June 07, 2020, 12:54:16 pm »

I didn't make it clear, although I did mention it, I have tried the AWG key but it is rejected every time.

THD · « **Reply #39 on:** June 07, 2020, 03:39:43 pm »

I've solved my AWG key entering issue. The key was valid, but was being rejected. So for anyone who may be having a similar issue :-

When you first enter the options page the option type is pre-populated with the _FG option.
Entering the key without touching anything else fails.
What I did in the end was open the drop down and re-select the _FG option, then enter the key.
That worked.

So it seems that even though the _FG option was pre-populated it wan't necessarily selected.

Elasia · « **Reply #40 on:** June 07, 2020, 08:17:18 pm »

Quote from: THD on June 07, 2020, 03:39:43 pm

I've solved my AWG key entering issue. The key was valid, but was being rejected. So for anyone who may be having a similar issue :-

When you first enter the options page the option type is pre-populated with the _FG option.
Entering the key without touching anything else fails.
What I did in the end was open the drop down and re-select the _FG option, then enter the key.
That worked.

So it seems that even though the _FG option was pre-populated it wan't necessarily selected.

Yeah this is a bug, i've seen it before now that you mention it so can confirm it

Martin72 · « **Reply #41 on:** June 07, 2020, 08:20:28 pm »

Hmmm…
Can´t remember that I got a problem with it.

Martin72 · « **Reply #42 on:** June 07, 2020, 08:31:01 pm »

Quote from: Martin72 on June 07, 2020, 08:20:28 pm

Hmmm…
Can´t remember that I got a problem with it.

Maybe because of this.

THD · « **Reply #43 on:** June 07, 2020, 08:48:54 pm »

I had definitely touched FG a couple of times and Key entry was still failing for me.

stafil · « **Reply #44 on:** June 10, 2020, 04:02:28 am »

Does this work for SDS5000X ?

Elasia · « **Reply #45 on:** June 10, 2020, 06:20:50 am »

Quote from: stafil on June 10, 2020, 04:02:28 am

Does this work for SDS5000X ?

If modded, but how much beyond model name? tv84 would most likely know

Scott Holmes · « **Reply #46 on:** June 11, 2020, 10:02:15 pm »

Wasn't able to use the 500M option, but oddly all of the other codes worked without issue. suggestions?

Elasia · « **Reply #47 on:** June 11, 2020, 10:10:52 pm »

Quote from: Scott Holmes on June 11, 2020, 10:02:15 pm

Wasn't able to use the 500M option, but oddly all of the other codes worked without issue. suggestions?

Fat finger?

You can try the SCPI command MCBD

Scott Holmes · « **Reply #48 on:** June 12, 2020, 12:57:56 am »

For whatever reason, I had to go 100M-> 200M ->350M ->500M. Enter the bandwidth keys in that order.

EEVblog · « **Reply #49 on:** June 13, 2020, 02:41:14 am »

Quote from: stafil on June 10, 2020, 04:02:28 am

Does this work for SDS5000X ?

I believe I saw on one of the hack scripts it mentioned that it does.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: Siglent SDS2000X Plus Hack (Read 156401 times)

Share me