| Products > Test Equipment |
| Siglent SDS2204X plus, X cursor tracking issue |
| (1/1) |
| imadjawad:
Hi, New to the Forum here, having a problem with my SDS2204X plus, X cursor doesn't track but shows the measurements, Y works, is it a bug? BTW I upgraded it to 350MHz. thank you all! :) |
| tautech:
--- Quote from: imadjawad on March 31, 2023, 03:03:56 am ---Hi, New to the Forum here, having a problem with my SDS2204X plus, X cursor doesn't track but shows the measurements, Y works, is it a bug? BTW I upgraded it to 350MHz. thank you all! :) --- End quote --- Welcome to the forum. It is customary to also report the firmware version used when reporting a possible bug as if you are on an older version this apparent bug may have already been rectified. Current version for the 06 HW is: https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS2000X%20Plus_V1.5.2R2_EN.zip If you are using V1.5.2R1 this is appropriate for all but the latest 06 HW. https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS2000X%20Plus_V1.5.2R1_EN-2.zip |
| Navigation |
| Message Index |