Products > Test Equipment
Siglent SDS5000X Oscilloscope Hack status - Dec 2021
tv84:
Use these:
USB20 -> "U20"
ARINC -> "A429"
Emo:
I can confirm A429 to be working!
Thank you(tried almost every other combination...)
Eric
FlexibleMammoth:
I remeber someone tried the eye&jotter option on a sds5000x when the 6000a was new and it did not work since it lacks a coprocessor... did anyone try the usb2.0 option?
tautech:
--- Quote from: FlexibleMammoth on July 09, 2023, 10:59:34 am ---I remeber someone tried the eye&jotter option on a sds5000x when the 6000a was new and it did not work since it lacks a coprocessor... did anyone try the usb2.0 option?
--- End quote ---
Please stop and think.
No option can work if the SW that makes it do is not installed into a piece of equipment.
SDS5000X does not have some of the capabilities SDS6000A has, period !
Just because some Python script can generate a license code means nothing if functionality is not installed.....nothing to do with HW capability.
Performa01:
--- Quote from: FlexibleMammoth on July 09, 2023, 10:59:34 am ---I remeber someone tried the eye&jotter option on a sds5000x when the 6000a was new and it did not work since it lacks a coprocessor...
--- End quote ---
The "coprocessor" is usually implemented in the FPGA, so we can create one whenever we need one. The FPGA resources are limited however - the SDS6000 certainly has a lot more of them compared to the SDS5000.
--- Quote from: FlexibleMammoth on July 09, 2023, 10:59:34 am ---did anyone try the usb2.0 option?
--- End quote ---
To the best of my knowledge, USB 2.0 is actually implemented using some kind of "co-processor", i.e. a special separate chip. USB 2.0 makes only sense in high bandwidth scopes, hence this option is for the SDS6000 and higher models exclusively.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version