Products > Test Equipment
Siglent SDS800X HD - Possible to extract CAN frame data with SCPI?
eTobey:
Hi,
i have searched through the SCPI command in the file "SIGLENT_Digital_Oscilloscopes_Remote Control Manual.pdf" (https://siglentna.com/USA_website_2014/Documents/Program_Material/SIGLENT_Digital_Oscilloscopes_Remote%20Control%20Manual.pdf) but could not find a command to extract the CAN frame data.
Anyone knows if/how this is possible? That file is from 2014, but i havent found a newer one.
Mahagam:
your command is: DECode:BUS<n>:RESult
Forget about "siglentna.com". All new datasheet stored at "int.siglent.com"
Yau are looking for https://int.siglent.com/u_file/document/SDS800XHD_Series_ProgrammingGuide_EN11F.pdf
eTobey:
Thanks a lot!
Together with sequence and history SCPI command, one can extract many minutes of CAN communication!
electronics hobbyist:
I suggest you ask a question in https://www.eevblog.com/forum/testgear/siglent-sds800x-hd-12-bit-dsos-coming/, as this post will be submerged. If others have the same question, they can find it in that post. :)
eTobey:
The SCPI is not working here:
(I can save a waveform with the webinterface, but not the time in the list. What a shame!)
Navigation
[0] Message Index
[#] Next page
Go to full version