| Products > Test Equipment |
| Siglent SHA800A |
| << < (3/5) > >> |
| lty1993:
Installing F2 will automatically remove F1. They are bandwidth license. |
| tautech:
--- Quote from: lty1993 on September 05, 2023, 04:46:29 am --- --- Quote from: tautech on September 04, 2023, 11:33:51 pm ---With the beta FW and license patch the screenshot below is what the Options page should look like with Trial options displayed and the MAP option is below the bottom of the page. --- End quote --- LOL, if you're going to patch a license, why not make it permanent? --- End quote --- You misunderstood, the patch was supplied by Siglent for the Trial time periods to be displayed like in all other Siglent analyzers. Study my screenshot above where all temporary option licenses display the trial time remaining. |
| tautech:
Getting to know this more to see what the trace colors are for the 6 traces it can do. :o 3 GHz @ 0dB from cough ;) SSG3021X via RG214 with 10 Hz RBW and missing a couple steps to 300kHz RBW. All traces Peak Hold however with the long sweep times for low RBW settings I haven't allowed for multiple sweeps to display less noise. |
| tautech:
New ECal units just released. SEM5000A range. 4.5, 9, 13.5 and 26.5 GHz, 2 and 4 port N type, SMA and 3.5mm variants. https://int.siglent.com/u_file/images/23_09_25/SEM5000A_datasheet_DS60050_E01A.pdf SEM5000A series electronic calibrators include 5002A / 5012A / 5022A / 5032A / 5004A / 5014A / 5024A / 5034A, covering the frequency bands of 9kHz to 4.5GHz / 9kHz to 9GHz / 100kHz to 13.5GHz / 100kHz to 26.5GHz, with USB interface for communication and power supply, and the RF connectors come in three forms: SMA, 3.5mm, and Type-N. They are suitable for calibration and error correction of SHA850A series, SVA1000X series and SNA5000A series vector network analyzers of SIGLENT. The SEM5000A series are simple, fast, efficient, accurate, and widely applicable. Prices from $2,345 |
| tautech:
New firmware for SHA800A models. Version: V2.1.2.1.6R5 67 MB https://int.siglent.com/upload_file/zip/firmware/Spectrum_analyzer/SHA850A_V2.1.2.1.6R5_EN.zip Release notes New Features: •Kml recording function. •Supports importing maps. •Supports map feature under Channel Power measurement record playback in SA mode. SCPI Commands: •Added [ [:SENSe]:WAVeform:POINts? ] command to obtain the number of IQ sampling points. •Added [ :FETCh:WAVeform? ] command to obtain IQ collected waveform data. Optimized Function: •Optimized the Channel Power measurement refresh response efficiency in SA mode. •Optimized VNC refresh efficiency. Solved Problem: •Fixed unstable frequency counter in SA mode. •Fixed audio demodulation buzzing sound in SA mode. •Fixed when trace is view in SA mode, a large error will be obtained when executing alignment. •Fixed incorrect sequence number when harmonics obtain fundamental wave amplitude in SA mode. |
| Navigation |
| Message Index |
| Next page |
| Previous page |