| Products > Test Equipment |
| Siglent SPD3303D review |
| << < (7/35) > >> |
| Zbig:
I've just found a rather hilarious firmware bug. The developers apparently cut some corners and it looks like when you save a preset (you can store up to 5 of them) it actually just dumps the RAM image to non-volatile storage. The result is, when you restore a preset, the start-up counter gets restored as well ;D I guess it's supposed to be an equivalent of a car's odometer so don't rely on it to much if you're planning on getting a second hand SPD3303 ;) Mine's firmware version is 1.01.01.01.03R1 (now, that's a mouthful). |
| FrankBuss:
Same in my version (I have firmware 1.01.01.01.05), it shows the start-up counter saved in the preset after restart. But not very useful anyway. In a lab it could be started just 10 times, but running 24x7 for years, and a hobbyist could start it 200 times, but only for half an hour each time. |
| Zbig:
--- Quote from: FrankBuss on October 13, 2013, 05:02:40 am ---Same in my version (I have firmware 1.01.01.01.05), it shows the start-up counter saved in the preset after restart. But not very useful anyway. In a lab it could be started just 10 times, but running 24x7 for years, and a hobbyist could start it 200 times, but only for half an hour each time. --- End quote --- Exaclty, and it doesn't tell you what it's been through (powering an Arduino for whole its life or some heavy inductive loads?), either. I don't care much about it, just find it kind of funny :) |
| FrankBuss:
Wold be interesting to take a look at the firmware, if you want to ask for a 1.01.01.01.05 firmware update file :) |
| Zbig:
--- Quote from: FrankBuss on October 16, 2013, 04:08:27 pm ---Wold be interesting to take a look at the firmware, if you want to ask for a 1.01.01.01.05 firmware update file :) --- End quote --- You mean ask Siglent support? Sure, why not, but I don't know their e-mail (never contacted them yet). Could you provide it, please? |
| Navigation |
| Message Index |
| Next page |
| Previous page |