Products > Test Equipment

Siglent SPD3303X-E Binding Post Issues - Solved

<< < (3/9) > >>

BillB:
I also have a late model SPD3033X-E and haven't run into any "inadequate" length issues, yet...  With the banana plugs, I mean.

Gandalf_Sr:
I haven't had many complaints about inadequate length, the occasional moan but no complaints.

tautech:

--- Quote from: Gandalf_Sr on March 05, 2018, 05:29:54 pm ---I haven't had many complaints about inadequate length, the occasional moan but no complaints.

--- End quote ---
Then let's make this the first one !

Without measurements we don't know if you're inadequate or not !  :)

From your OP we know we need 7+mm from the shoulder/base of the plug to the center if the 'lantern' spring for the plug to be retained firmly in the binding post.

I've heard squat back from Siglent as yet so I guess this issue is being discussed at length and they're maybe investigating alternative binding post suppliers to address your inadequate length issues Gandalf_Sr.  :)

bsudbrink:
I have an early SPD3303X, ordered right before Dave's video, and it has the binding post issue.  I've tried it with a number of different leads, including real Pomonas and none work.  I was not aware that they would provide new binding posts.  I just tried to create a user account on the Siglent web site, but that doesn't seem to be working at the moment.  Is there an email address for someone at Siglent that you could provide?  Thanks.

Performa01:
As you're in the US, you could complete the form here:

https://www.siglentamerica.com/contact-us/

I've just tried it and it seems to work okay.

Alternatively, there's also an email address: info@siglent.com

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod