Products > Test Equipment

Siglent SPD3303X-E Binding Post Issues - Solved

<< < (6/9) > >>

bsudbrink:
With the generosity of Gandalf_Sr, I replaced the binding posts on my SPD3303X-E.  I figured I would put up a few pictures because I know people like to look.

Gandalf_Sr:
So, were those binding posts better than the ones you had?

bsudbrink:

--- Quote from: Gandalf_Sr on March 17, 2018, 11:07:26 pm ---So, were those binding posts better than the ones you had?

--- End quote ---

Yes, very much.  Thanks!

bsudbrink:
Now that I have a spare set to play with, I think I will try filing 4 or so millimeters off the end of my originals and see how that works.  The color goes in, not that the color really matters, and if I get a relatively clean even cut, I bet an application of acetone would shine them right up.

Elasia:

--- Quote from: bsudbrink on March 18, 2018, 01:00:44 am ---Now that I have a spare set to play with, I think I will try filing 4 or so millimeters off the end of my originals and see how that works.  The color goes in, not that the color really matters, and if I get a relatively clean even cut, I bet an application of acetone would shine them right up.

--- End quote ---

I've been thinking about that myself.  If you do it, some pics and results would be nice!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod