Products > Test Equipment
Siglent SPD3303X-E Hi-Resolution Output Unlock?
tv84:
--- Quote from: XerXes777 on February 17, 2023, 07:06:52 pm ---Please tell me the best way to get the update to 1.01.01.03.10 and to use the hack.
I can do an update to 1.01.01.03.10.
And then i can use the hack from:
https://www.eevblog.com/forum/testgear/siglent-spd3303x-e-hi-resolution-output-unlock/msg4503400/#msg4503400
?
(Attachment Link)
--- End quote ---
Yes, I would say that's the only way.
XerXes777:
I have the hardware version 3.0 ?
see my picture https://www.eevblog.com/forum/testgear/siglent-spd3303x-e-hi-resolution-output-unlock/msg4708385/#msg4708385
So i can not upgrade to 1.01.01.03.10 ?
in the changelog is the info:
this firmware version only supports V6.1 hardware version of SPD3303X/X-E
Notes:
V6.1 hardware version of SPD3303X/X-E do not support rolling back to the previous firmware version
< V6.1 hardware version of SPD3303X/X-E
do not support upgrading to this version
Released P20 version of EasyPower to match this firmware
what is the right conversion firmware for me?
blurpy:
--- Quote from: XerXes777 on February 19, 2023, 11:21:57 am ---I have the hardware version 3.0 ?
what is the right conversion firmware for me?
--- End quote ---
I also have version 3.0, and I used the previous conversion firmware, from before the talk of the new hardware.
Finity:
SPD3303XE owner
Two things,
1) Did hardware really go from 3.0 to 6.1? Any significant differences? (just out of curiosity, my 3.0 works fine)
2) Having a time installing the VISA drivers, cannot seem to get them installed in a way Win10 can recognize. Unit is connected by USB and on my lan with valid IP address, but not seen as a valid usb device by Win10 or responding to Easypower by lan. :-// I would like to do resolution unlock but need to communicate with it first. |O
Any help would be appreciated!
tautech:
--- Quote from: Finity on March 05, 2023, 10:08:48 pm ---SPD3303XE owner
Two things,
1) Did hardware really go from 3.0 to 6.1? Any significant differences? (just out of curiosity, my 3.0 works fine)
--- End quote ---
Only internal for improved reliability or updates to more modern/better componentry.
--- Quote from: Finity on March 05, 2023, 10:08:48 pm ---2) Having a time installing the VISA drivers, cannot seem to get them installed in a way Win10 can recognize. Unit is connected by USB and on my lan with valid IP address, but not seen as a valid usb device by Win10 or responding to Easypower by lan.
--- End quote ---
There is a bug in that these units do not correctly remember an assigned IP. We are waiting on a fix.
USB and EasyPower should work fine if VISA and EasyPower were installed before an attempt to connect via USB.
If not, Windows that always knows best ::) will assign a USB driver to the device and continue to use it whenever it is connected. It's not the end of the world and in device properties or Device Manager we can assign the VISA driver permanently to the device so Windows plays nice at each connection.
See attachments for revised install guide from Siglent and a trouble shooting guide I wrote for this same issue with EasyScopeX.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version