EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: fanman on December 03, 2017, 02:31:47 am

Title: Siglent SSA3000X EMC Compliance Limits
Post by: fanman on December 03, 2017, 02:31:47 am

Hi guys

Newbie here asking about EMC pre-compliance with the Siglent spectrum analyzers. I've been playing around with the analyzer and noticed that the CISPR limits need to be entered manually or via a template. Does anyone out there know where I can obtain a pre-configured file for CISPR limits?

thanks

Fanman

Title: Re: Siglent SSA3000X EMC Compliance Limits
Post by: tautech on December 03, 2017, 06:47:15 am

Have a hunt through the 3 pages of FAQ's put together by US Siglent.
http://www.siglentamerica.com/prodcut-pxzl.aspx?id=5113&tid=227&T=2&page=1 (http://www.siglentamerica.com/prodcut-pxzl.aspx?id=5113&tid=227&T=2&page=1)

Title: Re: Siglent SSA3000X EMC Compliance Limits
Post by: simone.pignatti on December 03, 2017, 06:57:44 pm

Check this out, it works with both Rigol and Siglent spectrum analyzers
https://www.tekbox.net/test-equipment/emcview-pcsoftware-for-emcprecompliance-testing (https://www.tekbox.net/test-equipment/emcview-pcsoftware-for-emcprecompliance-testing)

Title: Re: Siglent SSA3000X EMC Compliance Limits
Post by: sjb on January 11, 2020, 04:41:54 pm

The previous link to the CISPR limits for the SSA3000X Series has changed. You can now find it at ...

https://siglentna.com/operating-tip/limit-lines-ssa3000x-spectrum-analyzer/ (https://siglentna.com/operating-tip/limit-lines-ssa3000x-spectrum-analyzer/)

and for those using Easy Spectrum ...

https://siglentna.com/operating-tip/set-custom-limits-siglent-easyspectrum-software/ (https://siglentna.com/operating-tip/set-custom-limits-siglent-easyspectrum-software/)