Author Topic: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer  (Read 9816 times)

0 Members and 1 Guest are viewing this topic.

Offline gj

  • Newbie
  • Posts: 3
  • Country: de
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #50 on: April 19, 2021, 08:22:10 pm »
Thank you. I did see that post but I didn't think it answered my questions and I'm not clear on what procedure was used to achieve that. I must have missed something - will go back and read that thread a few more times...  :-[
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 23800
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #51 on: April 19, 2021, 08:32:15 pm »

Are there any model specific pitfalls to avoid for the SSA3032X-R?
Yes with current FW there is a serious RBW limitation earlier SSA models do not have. Check datasheets.
Working with the factory to have this addressed.
Avid Rabid Hobbyist
Can help with advice on Siglent equipment when time allows.
 
The following users thanked this post: gj

Offline tv84

  • Super Contributor
  • ***
  • Posts: 2614
  • Country: pt
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #52 on: April 27, 2021, 06:00:01 pm »
Scripts for NAND backup and telnet (port 10101).  TESTED OK

MUST use FW V3.2.2.4.0 or greater!
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 2614
  • Country: pt
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #53 on: May 04, 2021, 07:24:52 pm »
Inside SSA3032X-R part 1/2
 
The following users thanked this post: Performa01, egonotto, TurboTom, 2N3055, kladit

Offline tv84

  • Super Contributor
  • ***
  • Posts: 2614
  • Country: pt
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #54 on: May 04, 2021, 07:26:20 pm »
Inside SSA3032X-R part 2/2
 
The following users thanked this post: Performa01, egonotto, TurboTom, 2N3055, kladit

Offline tv84

  • Super Contributor
  • ***
  • Posts: 2614
  • Country: pt
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #55 on: May 04, 2021, 07:31:42 pm »
VNA is a complete different device and has different hardware so, no upgrade is possible from Siglent SSA30xxX Plus to SSA30xxX-R.
 

Offline Noy

  • Frequent Contributor
  • **
  • Posts: 347
  • Country: de
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #56 on: May 04, 2021, 09:32:15 pm »
Many THX for your work and claryfication on this topic.
 

Offline gj

  • Newbie
  • Posts: 3
  • Country: de
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #57 on: May 14, 2021, 01:53:14 pm »
Are there any more updates regarding the RBW limitation?
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 23800
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #58 on: May 14, 2021, 09:07:35 pm »
Are there any more updates regarding the RBW limitation?
Yep but nothing official.
There will be new firmware to address this and considerable improvement has been made.
Avid Rabid Hobbyist
Can help with advice on Siglent equipment when time allows.
 
The following users thanked this post: gj

Offline eblake

  • Newbie
  • Posts: 4
  • Country: ca
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #59 on: November 29, 2021, 08:38:54 pm »
Quote
There will be new firmware to address this and considerable improvement has been made.

Unless I'm missing something, the latest firmware is still dated 2021-01-15 (v3.2.2.4.0). Is this correct?
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 23800
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #60 on: November 29, 2021, 09:11:06 pm »
Quote
There will be new firmware to address this and considerable improvement has been made.

Unless I'm missing something, the latest firmware is still dated 2021-01-15 (v3.2.2.4.0). Is this correct?
Welcome to the forum.

A V5 is not too far away but still has a few issues the factory is currently working on.
Avid Rabid Hobbyist
Can help with advice on Siglent equipment when time allows.
 

Offline dibro

  • Contributor
  • Posts: 10
  • Country: nl
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #61 on: December 08, 2021, 03:23:59 pm »
f.y.i. Siglent has made firmware version V3.2.2.5.0 available now.

https://www.siglenteu.com/service-and-support/firmware-software/spectrum-analyzers/#ssa3000x-r

Regards.
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 2614
  • Country: pt
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #62 on: December 08, 2021, 04:27:34 pm »
As the release notes say, must be installed after V3.2.2.4.0 because that previous version changed the ProdID to 11412.
 

Offline oewean

  • Contributor
  • Posts: 29
  • Country: no
    • Adroit.no
Re: Siglent SSA3000X-R 5/7.5GHz Real-Time Spectrum Analyzer
« Reply #63 on: June 28, 2022, 02:58:36 pm »
New firmware for SSA3000X-R
SSA3000X-R Firmware_V3.2.2.5.1R1 (Release Date 06.28.22 )
https://www.siglenteu.com/download/13101/

Improvements:
• Optimize the Ref level and Att couple
• Add SCPI commands in MA Mode
•READ:ADEMod:AVG?
•[:SENSe]:ADEMod:FM:DEVI?
•[:SENSe]:ADEMod:FM:DRIFt?
•[:SENSe]:BWIDth[:RESolution]
•[:SENSe]:BWIDth[:RESolution]?
•[:SENSe]:BWIDth:EQLPf
•[:SENSe]:BWIDth:EQLPf?
•CALCulate:MARKer#:PTPeak
• Add Cable Atten to correct cable loss in DTF Mode
• Add .trc file in EMI Mode
• Add .lic file auto scan
Solved Issues:
• Fix the false signals in density view in RTSA mode
• Fix pi/4 DPSK 和 pi/8 DPSK decode errors in MA mode
• Fix calibration error when port extension on in VNA mode
• Fix fft frequency error in narrow span in SA mode
• Fix trace avg calculation error in SA mode
• Fix the zero sweep type when fft in SA mode
Norwegian distributor of test and measurement equipment....
Adroit.no
 
The following users thanked this post: tautech, dibro


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf