Author Topic: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers  (Read 270801 times)

raidisk and 2 Guests are viewing this topic.

Offline echo99

  • Newbie
  • Posts: 2
  • Country: de
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1225 on: August 09, 2020, 03:59:56 pm »

If you want to take it further from here, to have the correct Serial number, you'll also need a way to generate the correct license info for your specific device's Serial + Host ID.
This can be done with some help from the forum, but the procedure is not public yet.  ;)

Thanks for clarification. Starting to doubt myself after reading all the relevant threads 10 times over  :scared: ;)

I also want to thank all the Members contributing to make this possible, especially tv84  :clap: :-+

Crossflashing on my SSA3021x+ ordered from Batronix a few days ago (Callibrated date 2020-03-20) went smooth.. also no missing link here  :phew:
 

Offline Towlerar

  • Newbie
  • Posts: 2
  • Country: us
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1226 on: August 12, 2020, 03:13:05 pm »
Please excuse my ignorance, as I'm a newbie at this sort of thing. If one needed to restore their equipment from a NAND dump, how would that occur? Is that done via JTAG interface?
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1814
  • Country: pt
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1227 on: August 12, 2020, 03:35:40 pm »
If one needed to restore their equipment from a NAND dump, how would that occur? Is that done via JTAG interface?

Opening the unit and, via UART, using the bootloader functionalities. No need for JTAG. If the equipment is somewhat working you could also try some NAND replacements via .ADS files.
 

Offline Billy33

  • Newbie
  • Posts: 3
  • Country: us
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1228 on: August 14, 2020, 02:53:59 pm »
Another instrument upgraded successfully, thanks a lot to all i got support from, and especially tv84!
Method was according post #1223 step by step plus some inputs afterwards.
 

Offline echo99

  • Newbie
  • Posts: 2
  • Country: de
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1229 on: August 15, 2020, 09:18:05 am »
Found out one can use FTP client to transfer screenshots and measument data from the instrument. Is there also a way to enable write access to the internal storage to create folders and rename files?
 

Offline Elasia

  • Frequent Contributor
  • **
  • Posts: 627
  • Country: us
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1230 on: August 15, 2020, 11:41:44 am »
Found out one can use FTP client to transfer screenshots and measument data from the instrument. Is there also a way to enable write access to the internal storage to create folders and rename files?

Grant yourself telnet and go to town
 

Offline TK

  • Super Contributor
  • ***
  • Posts: 1603
  • Country: us
  • I am a Systems Analyst who plays with Electronics
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1231 on: August 16, 2020, 08:38:04 pm »
Does the cross flashing to SVA1032X work on the SSA3015X plus?
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 19420
  • Country: nz
  • Taupaki Technologies Ltd. NZ Siglent Distributor
    • Taupaki Technologies Ltd.
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1232 on: August 16, 2020, 09:30:08 pm »
Does the cross flashing to SVA1032X work on the SSA3015X plus?
I guess you mean SVA1015X.
SVA1032X has a different LF VNA spec that suggests the HW is different. Check the datasheets.
Avid Rabid Hobbyist
 

Offline TK

  • Super Contributor
  • ***
  • Posts: 1603
  • Country: us
  • I am a Systems Analyst who plays with Electronics
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1233 on: August 16, 2020, 09:36:12 pm »
Does the cross flashing to SVA1032X work on the SSA3015X plus?
I guess you mean SVA1015X.
SVA1032X has a different LF VNA spec that suggests the HW is different. Check the datasheets.
No, I mean SSA3015X plus.  It was announced recently.

https://siglentna.com/news-article/siglent-ssa3000x-r-plus-spectrum-analyzer-family-welcomes-new-models-new-functions/
« Last Edit: August 16, 2020, 09:38:23 pm by TK »
 
The following users thanked this post: tautech

Online tautech

  • Super Contributor
  • ***
  • Posts: 19420
  • Country: nz
  • Taupaki Technologies Ltd. NZ Siglent Distributor
    • Taupaki Technologies Ltd.
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1234 on: August 16, 2020, 09:45:56 pm »
Does the cross flashing to SVA1032X work on the SSA3015X plus?
I guess you mean SVA1015X.
SVA1032X has a different LF VNA spec that suggests the HW is different. Check the datasheets.
No, I mean SSA3015X plus.  It was announced recently.

https://siglentna.com/news-article/siglent-ssa3000x-r-plus-spectrum-analyzer-family-welcomes-new-models-new-functions/
Oh wow....yes probably to your original question.

Would be nice if Siglent let their distributors know about new models.  :palm:

Edit
Check the datasheet TK. Maybe no to your question:
https://siglentna.com/wp-content/uploads/dlm_uploads/2020/02/SSA3000X-Plus_DataSheet_DS0703P_E03A.pdf
« Last Edit: August 16, 2020, 09:58:05 pm by tautech »
Avid Rabid Hobbyist
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1814
  • Country: pt
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1235 on: August 17, 2020, 01:51:16 pm »
Does the cross flashing to SVA1032X work on the SSA3015X plus?

Looking at the datasheet and knowing about the SVA1015X and SVA1032X differences, maybe this new SSA3015X Plus can only be crossflashed to SVA1015X.
 
The following users thanked this post: rf-loop, TK

Offline Elasia

  • Frequent Contributor
  • **
  • Posts: 627
  • Country: us
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1236 on: August 17, 2020, 10:34:28 pm »
Does the cross flashing to SVA1032X work on the SSA3015X plus?

Looking at the datasheet and knowing about the SVA1015X and SVA1032X differences, maybe this new SSA3015X Plus can only be crossflashed to SVA1015X.

This would plug the missing SSA from that 1.5GHz slot, i was surprised they didnt roll it out with the SVA 15

But yeah it couldnt cross flash with the others, its a different hardware set.. only the SVA1015X would be its match
 

Offline JAROLD

  • Newbie
  • Posts: 1
  • Country: fr
Re: Siglent SSA3000X Spectrum Analyzers
« Reply #1237 on: August 19, 2020, 03:24:49 pm »
Good morning all . Thank you for this Forum which is really great. I bought an SSA3021X in May 2020 with the TG option. I want to toggle my options permanently like EMI and Monitor FM. Unfortunately I am not an expert in Linux and I am a little lost in the correct method to apply to open all the options keeping the serial number and my option valid from the TG. Currently, I still have 34 hours of validity because I have not yet installed it in my workshop. If anyone on this forum can help me or point me to the best fit page for my model, I would be very happy.

My Siglent SYSTEM INFO :
SW1 1.2.9.3a
SW2 20180708-1
SW3 000000E1
HW  0F.03.00
 

Offline TK

  • Super Contributor
  • ***
  • Posts: 1603
  • Country: us
  • I am a Systems Analyst who plays with Electronics
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1238 on: August 21, 2020, 03:29:55 am »
Crossflashing to SVA1032X final step

For all those that want to get an official "SVA1032X" designation after having crossflashed their SSA3000X+, the only thing that you need to do is replace the firmdata0/NSP_trends_config_info.xml file with the attached one.

Reboot and voilá.

PS: This is a stock NSP_trends_config_info.xml taken from an "original" SVA1032X.

Hi tv84, thanks for the awesome work on this SSA/SVA crossflash!

* However, I suspect your attachment is wrong, it seems to be an .sh file (with the dumpnand script) instead of the NSP_trends_config_info.xml

* Also, I have crossflashed my device (to the latest 2.2.1.2.8), but still have XXXXXXXXXXXXXX as serial number / SN.
What's the way to do this right, while retaining all licenses as "Permanent" ?

Screenshot of my current system info is attached.
I can see RT40 activated... does it work on this crossflashed SVA1032X?
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1814
  • Country: pt
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1239 on: August 21, 2020, 08:34:08 am »
I can see RT40 activated... does it work on this crossflashed SVA1032X?

That is for SSAX-R.
 

Offline iulisan

  • Contributor
  • Posts: 18
  • Country: ro
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1240 on: August 25, 2020, 02:26:59 am »
HELP PLEASE :((((( I JUST BRIKED MY SSA3021X-PLUS :(((( I follow the 1223 post and now my siglent does not boot up the TG and MODE are light but that is all.PLEASE HELP.
 

Offline Precut

  • Contributor
  • Posts: 18
  • Country: tw
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1241 on: August 25, 2020, 05:01:34 am »
You need to get access to the internal UART interface to see console message.
 

Offline Elasia

  • Frequent Contributor
  • **
  • Posts: 627
  • Country: us
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1242 on: August 25, 2020, 10:47:02 am »
HELP PLEASE :((((( I JUST BRIKED MY SSA3021X-PLUS :(((( I follow the 1223 post and now my siglent does not boot up the TG and MODE are light but that is all.PLEASE HELP.

You will need to open up the back of the unit and plug into the uart vias as detailed a bit back in this thread, once you can paste what your boot messages are, one of us can walk you through it more than likely, worst case is usually a partition nand reflash from the uboot preboot prompt
 

Offline iulisan

  • Contributor
  • Posts: 18
  • Country: ro
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1243 on: August 26, 2020, 10:58:47 am »
Now : 13:41 , 26.08.2020 I WILL do that ! Wish me luck .Thank you all for the support !
 

Offline olc

  • Contributor
  • Posts: 5
  • Country: fr
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1244 on: August 26, 2020, 12:17:34 pm »
Hi @iulisan,

HELP PLEASE :((((( I JUST BRIKED MY SSA3021X-PLUS :(((( I follow the 1223 post and now my siglent does not boot up the TG and MODE are light but that is all.PLEASE HELP.

Do you know what step bricked it?
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1814
  • Country: pt
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1245 on: August 26, 2020, 01:11:22 pm »
Do you know what step bricked it?

For sure: not following the instructions to the letter.
 

Offline iulisan

  • Contributor
  • Posts: 18
  • Country: ro
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1246 on: August 26, 2020, 02:25:12 pm »
:(
 

Offline iulisan

  • Contributor
  • Posts: 18
  • Country: ro
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1247 on: August 26, 2020, 02:26:13 pm »
I will kill myself :(
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 1814
  • Country: pt
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1248 on: August 26, 2020, 02:33:20 pm »
Take a deep breath and wait for @Elasia.

Are you sure you have your serial port well connected and configured? Verify all once again.
 

Offline iulisan

  • Contributor
  • Posts: 18
  • Country: ro
Re: Siglent SSA3000X and SSA3000X-Plus Spectrum Analyzers
« Reply #1249 on: August 26, 2020, 02:48:16 pm »
Take a deep breath and wait for @Elasia.

Are you sure you have your serial port well connected and configured? Verify all once again.

I've tryied with 2 computers , 2 terminals all native serials.Puty and hercules show the the same ==it :( do not know :(
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf