| Products > Test Equipment |
| Siglent SSA3021X Plus EMI Standard levels issue |
| (1/2) > >> |
| vespaman:
So shall start to say that I am a newbie when it comes to the Siglent (just got it!), and forgotten much when it comes to using a spectrum analyzer in general. :) My problem is that I want to activate one of the Standard Limit for conducted emission, namely the 55032 (COND CLASSB AMN AVG). So I load it from the file system into e.g. limit 1. (I am running in EMI Mode). But:- instead of the limit starting at around 60dBuV, it is way up at 163dBuV, out of sight, so to speak. I realize I must have missed something, but... what? Maybe someone else has had this problem, or know exactly what I am missing? |
| vespaman:
Turns out this is known issue, and a FW fix is due shortly. |
| oz2cpu:
have you seen this video https://youtu.be/M_57a7WzHCQ i just dialed in the emi levels manually I am sure you can save the lines, and recall later when needed that ONE day at EMC lab we saved so much lab time using the Siglent, the saved time = money, was about halve of the cost the SSA to put things into perspective :-) |
| tautech:
--- Quote from: vespaman on September 21, 2023, 07:13:20 am ---Turns out this is known issue, and a FW fix is due shortly. --- End quote --- X or X Plus model ? Do you have the latest firmware installed ? SSA3000X https://int.siglent.com/upload_file/zip/firmware/Spectrum_analyzer/SSA3000X_V2.1.1.4_EN.zip SSA3000X Plus https://int.siglent.com/upload_file/zip/firmware/Spectrum_analyzer/SSA3000X%20Plus_V3.2.2.6.0R7_EN.zip |
| vespaman:
So in my case it is the plus. I have not upgraded to the latest FW, since according to support, the issue is still there. But there's a new FW "coming soon". I can, of course dial the standards in myself, but I managed without it for now. Next time I'll do some tests, hopefully the new FW is out. Just wanted to give this feedback if someone also had this issue. |
| Navigation |
| Message Index |
| Next page |