| Products > Test Equipment |
| Siglent SSA5000A 13.6 & 26.5 GHz Spectrum Analyzers |
| << < (2/2) |
| tautech:
Western marketplace release is today, 26th Sept. OP updated. Expect further edits as more info becomes available. |
| tautech:
BTW Release promotional offer: SSA5000-P3 and SSA5000-P5 function will be free from orders between September 26th to December 31st 2022. |
| hpw:
--- Quote from: switchabl on September 14, 2022, 10:45:43 am ---I think at current exchange rates $25k might almost buy you a Rohde & Schwarz FPL. Maybe more of a gap once you add options to both. I still like the form-factor of the new 5000 series. --- End quote --- A good test would be: - Input of an OXCO as 10/100MHz - Set RBW to 1Hz - have center as given signal - Freq. range as +/- 100 or 200Hz and look at the side peaks as they alter ... :o, as nice to see on SSA3000A Plus series |
| Scratch.HTF:
Gross margins for an illegally upgraded SSA5083A can be north of 55% - the hardware-related options requiring a software key are particularly lucurative. |
| tautech:
New firmware for SSA5000A models. Version: 1.1.2.1.7R3 72 MB https://int.siglent.com/upload_file/zip/firmware/Spectrum_analyzer/SSA5000A_1.1.2.1.7R3_EN.zip Release notes. Support EMI mode VNC interface optimization Solved Issues: The default detection type of the third-order intermodulation in SA mode is changed to Pos Fixed cursor readout update error when the readout type is not auto 10dB higher signal amplitude under harmonic analysis Harmonic analysis cannot modify the number of harmonics Solved the problem that FTP cannot be used MA mode time domain graph marker display unit corrected to dBV |
| Navigation |
| Message Index |
| Previous page |