Products > Test Equipment
Siglent SSG3000X and SSG5000X series RF Signal generators
coromonadalix:
Reworked some buttons sizes
coromonadalix:
oh received questions
the original siglent labview files : SSG-X-series-Labview-Driver-V2.0.zip available at their instrument download ...
the zipped VI My Project file put there : SSG-X-series-Labview-Driver-V2.0\Public\Configure
OR The one who contain everything : SSG-X-series-Labview-Driver-V2.0 - 1.zip
You launch : Siglent SSG Series.lvproj and open the VI I created
lots of thing to learn and very old tutorials on the web :--
Detlev:
It's pretty quiet around the SSG5000X here. What is your experience with the SSG? Is it recommended? The so-called A-brands are clearly more expensive than the Siglent
coromonadalix:
Its good for the use i have at my job, to go into the very low db outputs, -110 db
I use it for very short pulse generation
Hacked loll to 3.2 gig output, but does not have the IQ option board
I wold say works pretty well, but clumsy touch screen interface in some ways / too small loll .... thats why i tried to build an NI Labview interface, since i play a lot with output levels, the joggle encoder wont survive long
Does the job ... and saved $$$ since hacked loll
For sure its a big unit, and may not please audience
But if an Labview expert is lurking around loll PM me
I have a hard time to figure out a few things and or add the AM / FM options etc ... and compile it to an full executable, i dont know if i can get rid of the NI Labview frontpanel or have the front panel RUN arrow integrated in the software GUI ???
tautech:
New firmware for SSG3000X models
Version: V1.0.3.1.21
32 MB
https://int.siglent.com/upload_file/zip/firmware/Radio_Frequency_Signal_Source/SSG3000X_V1.0.3.1.21_EN.zip
Release notes
1. Fixed the defects related to the flatness list function
2.Fixed the defects related to SCPI command
3. Fixed the defects related to the VNC function.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version