| Products > Test Equipment |
| Siglent STB3 Demo board - Noisy Sine Wave.. |
| << < (3/4) > >> |
| simmiv:
That is good info.. I hope they fix this, otherwise it's grounds for returning the product and get a refund.. Don't see why they can't fix up the firmware and provide.. Unless they want to do a product recall for defects! Rdgs, Simmi |
| KungFuJosh:
--- Quote from: simmiv on September 02, 2024, 08:13:47 am ---I hope they fix this, otherwise it's grounds for returning the product and get a refund.. --- End quote --- If you do return it, the Batronix MSO demo board is excellent. |
| Martin72:
--- Quote from: simmiv on September 02, 2024, 08:13:47 am ---Don't see why they can't fix up the firmware and provide.. --- End quote --- First of all, thanks for trying it out, so there are now three of us with regard to the faulty I²C signal. ;) But this is also the “problem” as to why no new firmware is available yet. In terms of priority, this should be pretty much at the bottom end, for which I can even understand. Apart from that, simply installing a new firmware will not work, it will not work via USB, but if directly, with a programmer. The “original” file would be enough for me for the time being, it may be enough to reprogram the chip again. Hello Rob... ;) |
| tautech:
--- Quote from: Martin72 on September 02, 2024, 08:19:56 pm --- --- Quote from: simmiv on September 02, 2024, 08:13:47 am ---Don't see why they can't fix up the firmware and provide.. --- End quote --- First of all, thanks for trying it out, so there are now three of us with regard to the faulty I²C signal. ;) But this is also the “problem” as to why no new firmware is available yet. In terms of priority, this should be pretty much at the bottom end, for which I can even understand. Apart from that, simply installing a new firmware will not work, it will not work via USB, but if directly, with a programmer. The “original” file would be enough for me for the time being, it may be enough to reprogram the chip again. Hello Rob... ;) --- End quote --- Waves..... Actually Defpom has STB-3 and knows how to sniff stuff.......I'll see if he has time to do us a favor..... |
| TheDefpom:
You give me too much credit Rob, it is an Altera MAX 10 FPGA, not something I have any knowledge about, the clock and data lines go directly to the FPGA so whatever is happening relates to that device, something I expect most of you would have already known anyway. The FPGA used is the C8 variant, the slowest one... maybe it is too slow ? https://www.intel.com/content/www/us/en/docs/programmable/683794/current/fpga-device-datasheet.html |
| Navigation |
| Message Index |
| Next page |
| Previous page |