Author Topic: Does anyone here have a Hickok 6000A tube tester?  (Read 571 times)

0 Members and 1 Guest are viewing this topic.

Offline cvancTopic starter

  • Frequent Contributor
  • **
  • Posts: 672
  • Country: us
Does anyone here have a Hickok 6000A tube tester?
« on: March 08, 2023, 04:46:26 pm »
If you have one can you please share what your roll chart says for 6KD6 and 36KD6?  My chart is old and does not have them.  Thanks!
 

Offline 5065AGuru

  • Frequent Contributor
  • **
  • Posts: 355
  • Country: us
Re: Does anyone here have a Hickok 6000A tube tester?
« Reply #1 on: March 08, 2023, 06:31:22 pm »
6.3V for 6KD6 and 35.0V for 36KD6

Other settings the same for both B3-5632-4  70  90  A  6400
"connect jumper from tube cap to pin 6 on octal socket.

Cheers,

Corby
 
The following users thanked this post: cvanc

Offline cvancTopic starter

  • Frequent Contributor
  • **
  • Posts: 672
  • Country: us
Re: Does anyone here have a Hickok 6000A tube tester?
« Reply #2 on: March 09, 2023, 05:06:32 am »
Many thanks!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf