Products > Test Equipment
Siglent SDS1052DL+ / SDS1102CML+ hack
<< < (3/19) > >>
Labrat101:
Hi ,
I saw your Hack . I have the BK 2190E which has the Siglent M/Board SDY8.007.107D CML 160700  .. some how I got screwed  :wtf: .
The original bios was 6.01.01.19  so I got the update Bios from Siglent 6.01.01.21R2 .
It excepted the update with no problem . But it did not solve my problem which is if I put 10Mhz same signal in on both channels .
set it to maths - (minus)  I should get a flat line.  some how channel 2 is out of phase by 30degs .
I am not sure if its a Bandwidth problem or software.
I also noticed that in:  Save/Recall/   Setups  /  Factory / Uptate BW , options  at the moment it has the code "CCZ24QW9JKUCT6BZ" . which can be edited.
Can someone verify this code ? or give me some help or suggestion on this. I have a Feeling that BK have rebranded this model and just added there
flash start up screen over Siglent's   :palm:
And the strange difference between CH1 & CH2.  I am using military grade cables 50 ohms of coarse. .

Thanks
Labrat101:
Hi First i want to say thanks to the PM I got from a forum member who wishes to be anonymous . 8).
Who walk me though the process of getting my Rebranded PK2190E back to being a real Scope again .
And Now its showing its true color  SDS1152  @ 150MHz    Not as on the Box !00mhz

A word of warning to anyone who is thinking of buying a PK2190E .. Stop .. Its a rebranded Siglent SDS 1000A series .. get an original Siglent they are cheaper  |O ..

OK I got screwed . But my Guardian Angle came to my rescue . and debunked my Scope .
    O Thanks you .   :popcorn:

 
 
tautech:

--- Quote from: Labrat101 on November 22, 2019, 02:26:57 pm ---Hi First i want to say thanks to the PM I got from a forum member who wishes to be anonymous . 8).
Who walk me though the process of getting my Rebranded PK2190E back to being a real Scope again .
And Now its showing its true color  SDS1152  @ 150MHz    Not as on the Box !
--- End quote ---
Nice, enjoy.  :)


--- Quote ---A word of warning to anyone who is thinking of buying a PK2190E .. Stop .. Its a rebranded Siglent SDS 1000A series .. get an original Siglent they are cheaper  |O ..
--- End quote ---
Yep, somewhat cheaper.


--- Quote ---OK I got screwed .
--- End quote ---

Nope, you just didn't do enough homework.
There are 4 or 5 Siglent rebrands that I know of.
Not all models are, and other manufacturers just pick from Siglents range what they need to help complete their lineup.
Siglents most well known partnership is with LeCroy.
 
Labrat101:
Hi, I did not do a lot of home work.
I just looked at what I had got and research that.
If I had got the LeCroy. in side I would have been a very happy camper
I needed my scope to finish some tests to make a customer happy.
and had already spent 2 days chasing the dogs tail as they say looking for a problem that was not there.
And the calibration function was not working correctly. Now it works and all problems solved.
and my bench is clear for another week.  and It can compares two channels  .
Thanks .
I still say companies should tell the public that its some one else's engine inside. special big well known companies like PK.  Maybe asking too much . I am Happy to have it as a Siglent  .
I look at things old school if I bought a BMW and found fiat engine under the bonnet :wtf:  .. Ferrari  i'd except.
No Hard feeling . All is good .
croma641:
Hi to all,

I've got years ago an Atten ADS1062CAL. Upgraded at that times with the last Siglent firmware (perfectly working) :


Software Version 5.01.02.32
Hardware Version 6-41.2.1
Product Type SDS106X

The result is a "Siglent" 60 Mhz version.

My question is: can I upgrade it to 100 Mhz ? (Or more?)


thanks in advance !


P.S.:

1) this oscilloscope have only USB and serial port...
2) I've bought the RAM in order to upgrade this "Hybrid" to 2 Mpoints, now it has only 40Kpoints
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod