Products > Test Equipment
Siglent SDS1052DL+ / SDS1102CML+ hack
<< < (13/19) > >>
PiXEL8:

--- Quote from: tv84 on August 31, 2020, 07:35:39 pm ---Try this .CFG file and report.

--- End quote ---

There are two locations for this file. Replace both or a certain one?

/usr/bin/siglent/usr/config_file/Siglent_CML.cfg
/usr/bin/siglent/firmdata0/Siglent_CML.cfg
PiXEL8:

--- Quote from: tv84 on August 31, 2020, 07:53:09 pm ---Are the files equal?

If they are, replace both. Or experiment.

If they are different place both here.

--- End quote ---

Replaced the one in firmdata0 and reboot. No change. Replaced the other under ../usr/config_file. Reboot and stuck at Siglent boot logo. Power cycle instead of reboot the same.

Found hold 'Math' button to unbrick. Screen flashed at power cycle then came back to normal.

Language menu has every choice now and it booted in English. Under system status the model entry is missing and there is a '200M' to the far right of the sw version.
PiXEL8:
SCPI model now shows SDS120X
PiXEL8:

--- Quote from: tv84 on August 31, 2020, 08:30:06 pm --- :-+

Send me copies of both files in the scope, at this moment. And send also both files before replacements.

--- End quote ---

Both files are identical.
PiXEL8:

--- Quote from: tv84 on August 31, 2020, 08:52:10 pm ---And before replacement? Both were equal also?

--- End quote ---

Yes both of the original cfg files were identical.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod