| Products > Test Equipment |
| Signametrics 6.5 digit PCI DMM SM40CAL.DAT Calibration File Needed |
| << < (3/3) |
| Gribo:
Page 120 of the user manual has a sample cal file. The manual is in the driver's zip file. Did you set the card Id to yours? |
| pac1085:
--- Quote from: Gribo on January 03, 2025, 08:35:12 pm ---Page 120 of the user manual has a sample cal file. The manual is in the driver's zip file. Did you set the card Id to yours? --- End quote --- Yes, I did set the ID of the card (it gives a different error message if you don't) and built the file per that example as mentioned above. No good. |
| coromonadalix:
you dont have any missing drivers in windows device manager ? |
| pac1085:
No, the card and drivers are good. You can tell because the app does read the serial number of it and included in the error messages. You also hear the relays cycle on the card when the app opens and initializes the card. I’m guessing they realized this was a stupid idea and included the ability to auto generate the cal file on the later models like sm2060 |
| Navigation |
| Message Index |
| Previous page |