Products > Test Equipment
Small Kelvin clips that actually grab?
Electro Fan:
--- Quote from: precaud on November 20, 2020, 11:21:28 pm ---Those are the large clips, of which I have several. I want the small ones for this.
--- End quote ---
Oh, that's what 2" or less means in length means :)
I should have read your post more closely :palm:
None of the ones I tried were close to 2"; all were about 3.5" in length. Only other idea is to try 4 small (~2") Pomona or Pomona-like (E-Z Hook) mini grabbers - just not sure how much "grab" you need.
These E-Z Hook grabbers are the shortest (~2.25") single mini-grabber types I've seen that have some sorta/kinda semi-decent (but not real great) "grab", and the molded housings on the stackable banana plugs are better than the screw on plastic cover version. They come in various lead lengths.
If you find small, good grabbing, reliable measuring Kelvin clips let us know.
precaud:
I definitely will post if I find something. I don't wanna mess with individual grabbers. Sometimes there woudn't be enuf room for them anyway. The 2" clips I have would be fine if they didn't slip off so easily.
precaud:
--- Quote from: Martin72 on November 20, 2020, 09:57:37 pm ---Here they did the same I suggested and call it kelvin clamps:
https://www.sourcetronic.com/shop/de/kelvin-test-clips-st26027a.html
--- End quote ---
Those look real enough. The sense terminals are probably on the other side of the insertions. GenRad and Wayne Kerr made clip sets that attached like that.
tautech:
--- Quote from: precaud on November 20, 2020, 09:53:25 pm ---
--- Quote from: tautech on November 20, 2020, 09:23:42 pm ---Dremel mods time ?
--- End quote ---
Yeah, I've considered that and similar, but didn't want to bugger the plating.
--- End quote ---
File a little of the metal off where it doesn't matter to check what's under the plating.
Martin72:
Well.....I´ve totally forgot that I´ve already got small clips with good grip... ::) ;)
They came with my Ascel milliohm meter and got a nice building quality.
Grip is good, a small resistor with 0.8mm diameter leads they can handle it with no problems.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version