Products > Test Equipment
Sniffing the Rigol's internal I2C bus
AndersAnd:
--- Quote from: iNoxxam on December 10, 2013, 12:44:22 am ---Thanks,
I finally managed to get all the options by:
- Updating to 02.01 with the official .GEL (several times, to get it working)
- Installing the key generated with DSAR
- Installing the key generated with DSEA (for CAN)
- Installing the key generated with DSCA (for 300MHz)
My S/N is still DS2A0000000001 though. If someone finds out how to fix it I'll be interested into that.
It is now full option thanks to you... Thanks a lot!
--- End quote ---
cybernet has changed the enable all option from DSAR to DSHH in his post above.
But did you have to apply DSEA and DSCA afterwards too? This shouldn't be necessary if DSAR / DSHH has already enabled all options including 300 MHz and CAN.
iNoxxam:
--- Quote from: AndersAnd on December 10, 2013, 12:49:18 am ---cybernet has changed the enable all option from DSAR to DSHH in his post above.
But did you have to apply DSEA and DSCA afterwards too? This shouldn't be necessary if DSAR / DSHH has already enabled all options including 300 MHz and CAN.
--- End quote ---
Yup I had to. Else I would "only" have unlocked a 200MHz BW and no CAN analyzer.
AndersAnd:
--- Quote from: iNoxxam on December 10, 2013, 12:51:03 am ---
--- Quote from: AndersAnd on December 10, 2013, 12:49:18 am ---cybernet has changed the enable all option from DSAR to DSHH in his post above.
But did you have to apply DSEA and DSCA afterwards too? This shouldn't be necessary if DSAR / DSHH has already enabled all options including 300 MHz and CAN.
--- End quote ---
Yup I had to. Else I would "only" have unlocked a 200MHz BW and no CAN analyzer.
--- End quote ---
Did you check that before installing the last two keys?
That's not what cybernet wrote. So you're saying DSAR to DSHH doesn't install all options anyway, but only does the same as the already known DSAZ?
Btw. have you tested this:
--- Quote from: cybernet on December 09, 2013, 10:34:15 pm ---UPDATE: despite being DS2302 model, bw limit option is only NONE,20M,100M - somebody better confirm that NONE = 300M ;-)
--- End quote ---
iNoxxam:
--- Quote from: AndersAnd on December 10, 2013, 12:55:50 am ---
--- Quote from: iNoxxam on December 10, 2013, 12:51:03 am ---
--- Quote from: AndersAnd on December 10, 2013, 12:49:18 am ---cybernet has changed the enable all option from DSAR to DSHH in his post above.
But did you have to apply DSEA and DSCA afterwards too? This shouldn't be necessary if DSAR / DSHH has already enabled all options including 300 MHz and CAN.
--- End quote ---
Yup I had to. Else I would "only" have unlocked a 200MHz BW and no CAN analyzer.
--- End quote ---
Did you check that before installing the last two keys?
That's not what cybernet wrote. So you're saying DSAR to DSHH doesn't install all options anyway, but only does the same as the already known DSAZ?
Btw. have you tested this:
--- Quote from: cybernet on December 09, 2013, 10:34:15 pm ---UPDATE: despite being DS2302 model, bw limit option is only NONE,20M,100M - somebody better confirm that NONE = 300M ;-)
--- End quote ---
--- End quote ---
Yes I checked right after trying the DSAR.
Finally I uninstalled all options (using SCPI) and tried with DSHH, this one did actually enable everything.
I did not try the BW limit in "NONE" mode, but as soon as I get my hands on a function generator be sure I will.
alank2:
It looks like the 00.02.01.00.03 firmware fixes the both channels on in 1ns timebase issue.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version