Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (380/899) > >>
Carrington:
@fcab100 I believe that you are mixing tables. X variable was defined in the nex table, so DSY9 enable (200, 100, Men, Dec and Trig).
The table to which I refer is only for Y. If I'm not mistaken Y variable directly affects only to the new features.

Cheers.  :)


--- Code: ---Code table: Use DSYX for a official key, and use VSYX for a trial key.

X  200, 100, Mem, Dec, Trig

A   none
B   ==   ==   ==   ==   on
C   ==   ==   ==   on   ==
D   ==   ==   ==   on   on
E   ==   ==   on   ==   ==
F   ==   ==   on   ==   on
G   ==   ==   on   on   ==
H   ==   ==   on   on   on

Note: keys A..H wont change the model, only ADD an option.

2102:

J   ==   on   ==   ==   ==   
K   ==   on   ==   ==   on
L   ==   on   ==   on   ==
M   ==   on   ==   on   on
N   ==   on   on   ==   ==
P   ==   on   on   ==   on
Q   ==   on   on   on   ==
R   ==   on   on   on   on   <-  All 2102

2202:

S   on   ==   ==   ==   ==   
T   on   ==   ==   ==   on
U   on   ==   ==   on   ==
V   on   ==   ==   on   on
W   on   ==   on   ==   ==
X   on   ==   on   ==   on
Y   on   ==   on   on   ==
Z   on   ==   on   on   on   <-  All 2202

DONT USE BELOW Not recommended, as activates 2102 and also 2202:

2   on   on   ==   ==   ==
3   on   on   ==   ==   on
4   on   on   ==   on   ==
5   on   on   ==   on   on
6   on   on   on   ==   ==
7   on   on   on   ==   on
8   on   on   on   on   ==
9   on   on   on   on   on
--- End code ---
Git:

--- Quote from: eV1Te on December 11, 2013, 12:35:16 pm ---New firmware is out for DS1000Z, version 00.02.01.SP1

--- End quote ---

Has the key and/or serial number format changed?

Git
NikWing:
does the shop where you bought the DSO send you the updates?

I wonder if the waveform gen in the S version is limited, too
I found little to no information about this new DSO yet ...
and it seems I have to wait until January until I can obtain one :/


btw, just want to say this: I really repect what you people did here ... I wish I would know how cybernet (for example) did all this reverse engineering stuff ... wow :)
marmad:

--- Quote from: NikWing on December 11, 2013, 03:46:40 pm ---I wonder if the waveform gen in the S version is limited, too
--- End quote ---
No.


--- Quote ---I found little to no information about this new DSO yet ...
--- End quote ---
I'm not sure exactly which DSO you mean, but Rigol has published fairly detailed datasheets for both the DS2000A-S series, as well as the DS1000Z-S series.

Just look for the specs of the waveform generator down near the bottom in the "Signal Source (DSXXXXX-S)" section.
eV1Te:

--- Quote from: AndersAnd on December 11, 2013, 01:22:56 pm ---
--- Quote from: eV1Te on December 11, 2013, 12:35:16 pm ---New firmware is out for DS1000Z, version 00.02.01.SP1
--- End quote ---
Nice, can you please share the file?

--- End quote ---

Here is the new firmware for the DS1000Z and DS1000Z-S

Version 00.02.01.SP1

Too large to attach as a single file, so here is link to my FTP:
ftp://eevblog:555@ev1te.myftp.org/DS1000Z(ARM)update00.02.01.rar
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod