Products > Test Equipment
Sniffing the Rigol's internal I2C bus
m-joy:
--- Quote ---Be aware that so far I haven't been able to downgrade back to .02 from this version. Refer to my post above regarding the issue.
--- End quote ---
why would i downgrade....? Is 02 better than .03 ? In this case i could directly update to 02 and not to 03....?
Tasman:
--- Quote from: marmad on December 13, 2013, 09:59:33 am ---But, more importantly: Rigol has changed the the structure of unit settings stored in FRAM, so if you upgrade/downgrade between the major versions (v.01.XX.XX.XX to v.02.XX.XX.XX - or vice-versa), it's highly recommended to hold in the left-menu F6 button (sixth gray button down on left side of LCD) during the first reboot after loading (to clear FRAM) - otherwise the DSO will hang (often) when switching between various menu items.
--- End quote ---
Many thanks Marmad; I was wondering about that after seeing it in an earlier post, but didn't get around to investigating further. You have no doubt saved me from a lot of frustration.
fcab100:
I was messing with the jumpers on my ds2072 hw2 look what i got. Its late need sleep :=\
eV1Te:
--- Quote from: fcab100 on December 13, 2013, 11:14:08 am ---I was messing with the jumpers on my ds2072 hw2 look what i got. Its late need sleep :=\
--- End quote ---
Nice find! :-+
To bad you don't have the hardware for the signal gen though.
PA0PBZ:
--- Quote from: eV1Te on December 13, 2013, 11:24:24 am ---To bad you don't have the hardware for the signal gen though.
--- End quote ---
I wonder what it takes, we really need someone with the S model to have a look :-/O
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version