| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (413/899) > >> |
| MrsR:
Hi! Guys, Well I went back and tried again. same PRIVATE KEY came up. TRIED: DSAB Adv. Trig. DSAC Decoders DSEA CAN Decoders DSAS 200MHz This is all I wanted to add mainly for the 1ns Time. Nothing worked so I got a bit frustrated and tried DSHH. Well I have a 300 MHz DSO with my 1ns. Also got all the triggers. Decoders, my Trial bits turned into Official and still kept 56M memory. I guess it was the memory that caused the problems, being overwritten most likely allowed the code to work. Thanks again guys, Rachael :-+ ............................. |
| MrsR:
I have the A version FW as I was trying to get the latest FW. for the DS2000. and RIGOL HEAD OFFICE lied to me and said that the 1000003 was the latest FW and If I wanted to up date I had to have the A version. I think the A version will stop the theft of the options that we have already paid for. Well it's theft in their eyes. Not mine though I paid over$350 for the extended memory, that was already in my DSO at the time I thought I would get a board to fit into the DSO and then I got a fancy printed page that left it to me to make sure I got the memory from RIGOL via email. I better get back to work or I might have to fire my self 8) CATCH YOU LATER Rachael :-+ |
| alank2:
Does anyone know what type of async memory the DS2000 has/uses? The blackfin manual talks about 4 banks of 1M each at 0x20000000. They configure the registers for all 4 banks although two are configured the same so I don't know if they use all four banks or not. |
| MrsR:
--- Quote from: Teneyes on December 20, 2013, 07:50:53 am --- --- Quote from: MrsR on December 20, 2013, 03:14:26 am --- DSAS 200MHz This is all I wanted to add mainly for the 1ns Time. Nothing worked so I got a bit frustrated and tried DSHH. --- End quote --- Hi Rachael (and all) Note: DS2202 --> 200MHz only sets the fastest Timebase limit to 2nSec/Div (NOT 1nSec/div) --- End quote --- Thanks Len I forgot :o Rachael :-+ |
| DL5TOR:
--- Quote from: alank2 on December 20, 2013, 02:50:54 pm ---Does anyone know what type of async memory the DS2000 has/uses? The blackfin manual talks about 4 banks of 1M each at 0x20000000. They configure the registers for all 4 banks although two are configured the same so I don't know if they use all four banks or not. --- End quote --- Use all 4 banks and the other banks |
| Navigation |
| Message Index |
| Next page |
| Previous page |