| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (448/899) > >> |
| NikWing:
just to avoid troubles: all I have to do is entering the private key, serial (of course) and DSHH? |
| AndersAnd:
--- Quote from: NikWing on December 30, 2013, 12:31:08 am ---just to avoid troubles: all I have to do is entering the private key, serial (of course) and DSHH? --- End quote --- I would think so yes. And remember leave out 0x part, so just paste 888E77EE47C50A in the private key field. |
| NikWing:
ok, I found out about the 0x before I read your reply lol it says licence is unavailable |
| MrsR:
Hi! Guys, I've been a bit lazy :=\ ( might be all the Turkey I been eating ) anyway I was doing some work with my updated 72 to 302 and found that I couldn't record the waveforms I was working on. I should add that I had the DSO Band Width set on 20MHz. Also I don't use AUTO on my scopes, prefer to set the DSO to what I want, anyway I tried to use AUTO and all I got was a blank screen and then after a few tries a menu outline with no instructions. :-// Has anyone had any problems like that on a modified DS2072 ??. I have a stack of work to do and will get back to it next weekend I am not really worried about the AUTO part but not being able to record and save the output is a big worry. It isn't a DSO if I can't store on it. It might have been turned into a DO Scope. I can still capture screenshots on USB Sticks but I need the storage so I can study and send the test results to others on the team. Nearly all our work is shared by Video conferencing. Someone said they had problems with adjusting voltage height, I haven't had that problem. Also has there been other problems after changing from lower Band Width to 300MHz. Thanks Guys Rachael :-+ Keeping a positive outlook |
| AndersAnd:
--- Quote from: NikWing on December 30, 2013, 12:39:10 am ---ok, I found out about the 0x before I read your reply lol it says licence is unavailable --- End quote --- Try to see if some of the other DSxx codes listed works: --- Quote ---DS2000 device options: first character: D = official, V = trial DSAB - Advanced Triggers DSAC - I2C, SPI and RS232 Decoders DSEA - CAN Decoder DSAE - 56M Memory DSAJ - 100MHz DSAS - 200MHz DSCA - 300MHz DSHH - all options --- End quote --- |
| Navigation |
| Message Index |
| Next page |
| Previous page |