Products > Test Equipment
Sniffing the Rigol's internal I2C bus
NikWing:
just to avoid troubles:
all I have to do is entering the private key, serial (of course) and DSHH?
AndersAnd:
--- Quote from: NikWing on December 30, 2013, 12:31:08 am ---just to avoid troubles:
all I have to do is entering the private key, serial (of course) and DSHH?
--- End quote ---
I would think so yes.
And remember leave out 0x part, so just paste 888E77EE47C50A in the private key field.
NikWing:
ok, I found out about the 0x before I read your reply lol
it says licence is unavailable
MrsR:
Hi! Guys,
I've been a bit lazy :=\ ( might be all the Turkey I been eating ) anyway I was doing some work with my updated 72 to 302 and found that I couldn't record the waveforms I was working on.
I should add that I had the DSO Band Width set on 20MHz.
Also I don't use AUTO on my scopes, prefer to set the DSO to what I want, anyway I tried to use AUTO and all I got was a blank screen and then after a few tries a menu outline with no instructions. :-//
Has anyone had any problems like that on a modified DS2072 ??.
I have a stack of work to do and will get back to it next weekend I am not really worried about the AUTO part but not being able to record and save the output is a big worry. It isn't a DSO if I can't store on it. It might have been turned into a DO Scope. I can still capture screenshots on USB Sticks but I need the storage so I can study and send the test results to others on the team. Nearly all our work is shared by Video conferencing. Someone said they had problems with adjusting voltage height, I haven't had that problem.
Also has there been other problems after changing from lower Band Width to 300MHz.
Thanks Guys
Rachael :-+ Keeping a positive outlook
AndersAnd:
--- Quote from: NikWing on December 30, 2013, 12:39:10 am ---ok, I found out about the 0x before I read your reply lol
it says licence is unavailable
--- End quote ---
Try to see if some of the other DSxx codes listed works:
--- Quote ---DS2000 device options:
first character: D = official, V = trial
DSAB - Advanced Triggers
DSAC - I2C, SPI and RS232 Decoders
DSEA - CAN Decoder
DSAE - 56M Memory
DSAJ - 100MHz
DSAS - 200MHz
DSCA - 300MHz
DSHH - all options
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version