| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (514/899) > >> |
| AndersAnd:
--- Quote from: Avotronics on January 16, 2014, 02:33:13 pm ---Cybernet's modded firmware can be found here permanently. Sorry, direct linking isn't available. http://rigol.avotronics.co.uk/msods4000-series/ --- End quote --- Thanks. You should probably host Marc M's snmodfix.zip and guide for DS2000 S/N restoration too. And also the JTAG memory dump guide posted earlier. |
| marmad:
--- Quote from: AndersAnd on January 16, 2014, 02:52:01 pm ---cybernet also wrote it works with both DS4000 and MSO4000 and also both 2 and 4 channel models: --- End quote --- Not quite: cybernet wrote: --- Quote from: cybernet on November 27, 2013, 07:30:33 pm ---anyhow no guarantees for anything like always ... --- End quote --- You might just mention that when steering people towards something which, as far as I know, is untested on an MSO4. If it goes wrong it can be a costly and/or time-consuming problem to fix - not for you - but for the person you steered. |
| marmad:
--- Quote from: pascal_sweden on January 15, 2014, 07:38:17 pm ---I have received feedback from the Swedish distributor that the DS2072 which is on sales (special offer as DS2072A replaces the old model) is in fact HW version 2. Is it worth to buy the HW version 2? Or is the A version even better? --- End quote --- As I recommended to you in another thread which you started, unless you want an S-model (with the AWG) - if you can get the non-A HW v.2 model, IMO, that's what you should get. The hardware is the same - and you'll be able to upgrade to any new firmware while keeping all of your unpaid-for options. OTOH, the A-model owners MAY need some new hacking with every new version of FW released to avoid losing their options. |
| MrKrabs:
--- Quote from: neslekkim on January 16, 2014, 02:20:48 pm --- --- Quote from: AndersAnd on January 16, 2014, 01:58:21 pm --- 2) Then follow the cybernet's instructions posted here. --- End quote --- There the geltool is mentioned again, where do one find that? --- End quote --- cybernet hasn't released it (yet?). I modified the firmware by hand :( |
| MrKrabs:
--- Quote from: Avotronics on January 16, 2014, 02:19:53 pm ---Can I have confirmed please: Is the DS405XUpdate only for DS405X models or all DS4000. I'm not reading the whole thread, I just need to know where to put it on my rigol site. Thanks --- End quote --- Please upload this one too: http://www.wikisend.com/download/436838/DS4000update_00.02.01.00.03.zip (original firmware, latest version) |
| Navigation |
| Message Index |
| Next page |
| Previous page |