Products > Test Equipment

Sniffing the Rigol's internal I2C bus

<< < (515/899) > >>

Altemir:

--- Quote from: MrKrabs on January 16, 2014, 04:59:07 pm ---
Please upload this one too:

http://www.wikisend.com/download/436838/DS4000update_00.02.01.00.03.zip (original firmware, latest version)

--- End quote ---
I have putted it version to first post of topic Rigol MSO4000 and DS4000. Tests, bugs, firmware, questions, etc...

zombie28:
One of the forum members tested my DS2k 00.02.01.00.03 firmware patch and reported that it works fine, ie. allows to use the old keygen with A scopes without any problems. This patch is a temporary solution for those who cannot or don't want to do memory dumps (at least until it's possible via USB). Of course extracting keys from memory is still preferred method, because license codes created this way should work even with future official firmware releases.

So, enjoy  ;)
https://mega.co.nz/#!FFk10SCY!UuWPXyqZwmca00pa2clOth1ryh1Z-AAgJg2yibfoUw0

AndersAnd:

--- Quote from: zombie28 on January 16, 2014, 06:45:59 pm ---One of the forum members tested my DS2k 00.02.01.00.03 firmware patch and reported that it works fine, ie. allows to use the old keygen with A scopes without any problems.
--- End quote ---
Nice. And the 50 ohm input option still works?

alank2:

--- Quote from: zombie28 on January 16, 2014, 06:45:59 pm ---One of the forum members tested my DS2k 00.02.01.00.03 firmware patch and reported that it works fine, ie. allows to use the old keygen with A scopes without any problems.

--- End quote ---

Out of curiosity (don't have an A scope myself), what happens if you load the custom firmware, use a non-A key, then upgrade to stock firmware?  Do the options stay?

zombie28:

--- Quote from: AndersAnd on January 16, 2014, 06:50:51 pm ---
--- Quote from: zombie28 on January 16, 2014, 06:45:59 pm ---One of the forum members tested my DS2k 00.02.01.00.03 firmware patch and reported that it works fine, ie. allows to use the old keygen with A scopes without any problems.
--- End quote ---
Nice. And the 50 ohm input option still works?

--- End quote ---

Here is quote from his mail:


--- Quote ---I did this to verify your patched firmware:

-- Used SYSTEM:UNINSTALL to remove all my current options that I got using tirulerbach's rigup keygen (verified back to trial versions etc.)
-- Flashed your patched GEL
-- Installed DSHH key from riglol 1.03c

50 Ohm option + serial etc. are all intact.  I have 2ns
--- End quote ---

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod