Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (521/899) > >>
pascal_sweden:

--- Quote from: Altemir on January 17, 2014, 07:08:53 am ---MrKrabs
You have got 500MHz DSO with this FW, but SysInfo show DS4014? Do you already have frequency response tests?

--- End quote ---

Is it possible to upgrade MSO4014 to MSO4054? Is the HW 100% identical? Has hack confirmed to be working not only in GUI, but also in actual frequency response test?
johna:
You can test it with any digital signal that's lower. On 100 MHz scope if you watch 100 MHz square wave it'll look like 2 summed sines:

although maybe you can't capture much of the second harmonic.
I think even 40-50 MHz square wave will look that way on 100MHz scope. Maybe the clock output from a microcontroller...
Altemir:
MrKrabs
Thank you very much! As soon as free time, I will try to do tests on the job's MSO4024 up to 2GHz. Can you make a patch to 350MHz test?
AndersAnd:

--- Quote from: stuartk on January 17, 2014, 04:11:33 am ---Should I reset the options by putting the code for the trial options for the DS2102 back in and redo it?
--- End quote ---
You can't uninstall options by installing other options instead. You need to use the SCPI command :SYSTem:OPTion:UNINSTall command to uninstall keys. This has already been mentioned several times in this topic.

If you're not familiar with SCPI commands, read your scope's user's manual + programming guide, both documents has info about SCPI commands.

You can search this topic for :SYSTem:OPTion:UNINSTall for more info.

SCPI = Standard Commands for Programmable Instruments https://en.wikipedia.org/wiki/Standard_Commands_for_Programmable_Instruments
ve7xen:
It's been a while since I've monitored this thread and it appears plenty of progress has been made. Excellent work everyone!

Took the opportunity to mirror a bunch more useful files permanently at http://www.gotroot.ca/rigol as well as setting up a cron job to pull down the complete thread every day as well. If there's anything else that should be there, send me files or PMs and I will make it so.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod