| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (522/899) > >> |
| eliocor:
--- Quote from: ve7xen on January 17, 2014, 10:38:24 am ---Took the opportunity to mirror a bunch more useful files permanently at http://www.gotroot.ca/rigol as well as setting up a cron job to pull down the complete thread every day as well. If there's anything else that should be there, send me files or PMs and I will make it so. --- End quote --- Suggestion: it would be better if you can add date/time file was added to your repository. Thanks for your work! |
| Altemir:
MrKrabs I wrote your fw to my MSO4024 for 500MHz and got interesting results. All is good. See my own topic today: many pictures requre processing. |
| stuartk:
--- Quote ---Posted by: AndersAnd « on: Yesterday at 08:46:08 PM » Quote from: stuartk on Yesterday at 03:11:33 PM Should I reset the options by putting the code for the trial options for the DS2102 back in and redo it? You can't uninstall options by installing other options instead. You need to use the SCPI command :SYSTem:OPTion:UNINSTall command to uninstall keys. This has already been mentioned several times in this topic. If you're not familiar with SCPI commands, read your scope's user's manual + programming guide, both documents has info about SCPI commands. You can search this topic for :SYSTem:OPTion:UNINSTall for more info. SCPI = Standard Commands for Programmable Instruments https://en.wikipedia.org/wiki/Standard_Commands_for_Programmable_Instruments --- End quote --- AndersAnd Thanks for pointing me in the right direction. I performed the following proceedure to reset it: To erase options: In Ultra Sigma: Right click on the Scope USB Line Select SCPI Control Panel Paste: SYSTEM:OPTION:UNINSTALL over the *IDN? Send the command It erased the options The scope was back to the trial version even remembering the original number of minutes I had left. I reapplied the code I used before and all the options vanished with the exception that the scope was now a DS2202 instead of a DS2102. ??? (Windows even reinstalled the scope as a DS2202) :-+ I should have checked that the S/N was reset to DS2A0000000001 I reran the KeyGen using the mangled serial number and now it seems to work fine with all options with the exception of the loss of the serial number The minimum timebase flipped from 5ns to 2ns I appreciate your help, S. |
| AndersAnd:
--- Quote from: stuartk on January 17, 2014, 03:04:56 pm ---I should have checked that the S/N was reset to DS2A0000000001 I reran the KeyGen using the mangled serial number and now it seems to work fine with all options with the exception of the loss of the serial number --- End quote --- You can restore your DS2000's original serial number following this procedure: https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/msg369122/#msg369122 Btw. What FW version do you have and what 4 letter code did you use to generate your key? I don't see CAN decoder listed? With the latest FW installed: Use DSEZ for 200 MHz with all other options enabled including CAN but without 50 ohm option from the A-series. [not listed here: http://riglol.3owl.com but still works] Read about DSEZ and other codes here: https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/msg356379/?topicseen#msg356379 |
| AndersAnd:
--- Quote from: eliocor on January 17, 2014, 12:27:40 pm --- --- Quote from: ve7xen on January 17, 2014, 10:38:24 am ---Took the opportunity to mirror a bunch more useful files permanently at http://www.gotroot.ca/rigol as well as setting up a cron job to pull down the complete thread every day as well. If there's anything else that should be there, send me files or PMs and I will make it so. --- End quote --- Suggestion: it would be better if you can add date/time file was added to your repository. Thanks for your work! --- End quote --- Another suggestion: Ad folder for all the different Rigol series DS1000E/D, DS1000Z, DS2000, MS0/DS40000, DS6000, DSA8000, DP8000, DG4000 etc. and put the various files in the correct folders. It would make it much easier to navigate and find the relevant files for a specific Rigol product series. |
| Navigation |
| Message Index |
| Next page |
| Previous page |