Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (537/899) > >>
Wall-E:
Will you share your DP832 memory dumps with us? If so, what firmware version do you have? I'm analyzing 1.08 GEL atm to find out the new license codes format.
                   zombie28
[/quote]
It's now Firmware version  00.01.09 for the DP800 Series including the DP832 (non A).  And I understand that it's not good news with all options lost, and no way to go back to FW 06, or 08.

Note: This Firmware has been provided to DP832 (non A) users by Rigol for those that had requested a FW Update for their units.

Ref.  RIGOL DP832 Power Supply - firmware upgrade, « Reply #36 on: Yesterday at 03:38:23 AM »   Although I don't think Rigol supplied this particular person his FW 09.
marmad:

--- Quote from: alank2 on January 21, 2014, 03:01:01 pm ---
--- Quote from: cidcorp on January 21, 2014, 02:42:46 pm ---[1] Two questions though relating to the DS1000Z's - is there an EXTENDED system/info button trick like the DS2000 ie F7-F6-F7-etc (sorry going from memory which is horrible) for
HW revision FW revision info?

--- End quote ---

#1 - I asked this question and no one could answer.  One person was able to do it, but he can't remember exactly how.

--- End quote ---

Seeing as how the DS2000/DS4000/DS6000 all use the same F7-F6-F7 routine to get to the Project Menu, it seems the DS1000Z (the latest member of the UltraVision line) would do as well.
Sparky:

--- Quote from: Wall-E on January 21, 2014, 11:35:25 pm ---It's now Firmware version  00.01.09 for the DP800 Series including the DP832 (non A).  And I understand that it's not good news with all options lost, and no way to go back to FW 06, or 08.

Note: This Firmware has been provided to DP832 (non A) users by Rigol for those that had requested a FW Update for their units.

Ref.  RIGOL DP832 Power Supply - firmware upgrade, « Reply #36 on: Yesterday at 03:38:23 AM »   Although I don't think Rigol supplied this particular person his FW 09.

--- End quote ---

In the post you reference, Sebastian states "the Riglol Keys don't work" --- which is no different from 01.08 where they didn't work either (and why people downgraded to 01.06 to install the keys and then upgraded to 01.08). 

How exactly are you concluding "all options lost"?
AndersAnd:

--- Quote from: Sparky on January 22, 2014, 06:18:01 am ---
--- Quote from: Wall-E on January 21, 2014, 11:35:25 pm ---It's now Firmware version  00.01.09 for the DP800 Series including the DP832 (non A).  And I understand that it's not good news with all options lost, and no way to go back to FW 06, or 08.

Note: This Firmware has been provided to DP832 (non A) users by Rigol for those that had requested a FW Update for their units.

Ref.  RIGOL DP832 Power Supply - firmware upgrade, « Reply #36 on: Yesterday at 03:38:23 AM »   Although I don't think Rigol supplied this particular person his FW 09.

--- End quote ---
In the post you reference, Sebastian states "the Riglol Keys don't work" --- which is no different from 01.08 where they didn't work either (and why people downgraded to 01.06 to install the keys and then upgraded to 01.08). 

How exactly are you concluding "all options lost"?

--- End quote ---
He wrote that you can't downgrade to FW 06 or 08 anymore after upgrading to FW 09. So he can't install any options by downgrading to FW 06 like you suggest. So that's probably why he wrote all options lost.
Git:

--- Quote from: marmad on January 21, 2014, 11:51:16 pm ---
Seeing as how the DS2000/DS4000/DS6000 all use the same F7-F6-F7 routine to get to the Project Menu, it seems the DS1000Z (the latest member of the UltraVision line) would do as well.


--- End quote ---

Unlikely, the DS1000Z family doesn't have an F7 button, unless that is what you call the 'Next Page' pale blue button at the bottom?

Git
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod