| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (555/899) > >> |
| zombie28:
--- Quote from: ju1ce on February 02, 2014, 02:51:18 pm ---I tried this and got the keys. I'm afraid I can't do anything with them though unless a keygen is published. --- End quote --- Now you can (thanks tirulerbach!) The keygen requires memory dump in a binary form, so you will need some hex editor (like HxD) to create one. Just paste the keys as a sequence of bytes, append your scope's serial number as plain text and terminate it with 0. Now you can use the keygen, like this: --- Code: ---rigup.exe DS2072A dump.bin --- End code --- |
| diyaudio:
--- Quote from: ju1ce on February 02, 2014, 02:51:18 pm --- --- Quote from: zombie28 on February 01, 2014, 08:10:30 pm ---Done! https://mega.co.nz/#!MdcEWTgL!0EEmSr-Q6TxaFSsyEmjhRrgqDvFCoXg9K49BalL5Uxc No need for JTAG memory dumps anymore, just send *IDN? command and you'll get your license encryption keys in response (tested on my DS2072A that has just arrived). --- End quote --- Thanks. I tried this and got the keys. I'm afraid I can't do anything with them though unless a keygen is published. I tried earlier to do a memory dump using Segger J-Link, but it failed after about 48 hours... --- Quote from: diyaudio on February 02, 2014, 01:53:18 pm ---zombie28 ! great work! Can anyone do a demo and upload to youtube for us. please. --- End quote --- Install this firmware (you get the update instructions pdf from Rigol if you request a firmware update). Connect the scope to your windows PC using lan or usb and send the IDN command using Rigol's Ultra Sigma software (I'm sure there are other alternatives as well). The keys are in the output as told in the readme file. Anything simpler and it soon becomes too easy... --- End quote --- hi ju1ce ! Thanks for those steps. (Sorry for coming across lazy) will download the software now. |
| ju1ce:
--- Quote from: tirulerbach on February 02, 2014, 03:03:20 pm ---Decided: https://mega.co.nz/#!qAkUkTZB!XG12bUKhIz4CmQt6DbBnGRMvEe5AvUjEaBxi4R03tw8 ;) --- End quote --- Thank you for your work and for releasing this keygen! --- Quote from: zombie28 on February 02, 2014, 03:35:00 pm ---Now you can (thanks tirulerbach!) The keygen requires memory dump in a binary form, so you will need some hex editor (like HxD) to create one. Just paste the keys as a sequence of bytes, append your serial number as plain text and terminate it with 0. Now you can use the keygen, like this: --- End quote --- Got it. Thanks for the instructions and everything you've done for this hack. I successfully installed the options, as you can see. |
| ZeroAviation:
I used the 'special' firmware to dump my keys. Then used the rigup keygen with the following results. The 100MHZ (NSER) works for me. However the 200MHZ (NSEQ) does not. (Says licenses unavailable on the scope) Any ideas? Mine is a week 47 scope. Cheers guys! Thanks for the hard work. -Matt |
| kado:
Hello to all, i can´t download tirulerbach´s keygen from mega.co.nz. Too much download requests this time or hacked from PRC? Please can anybody mirror this file? Thanks, Karsten |
| Navigation |
| Message Index |
| Next page |
| Previous page |