Products > Test Equipment
Sniffing the Rigol's internal I2C bus
tiagobaracho:
Me too.. i cant donwload..... Please send it to www.yousendit.com it works great
I am Just waiting for it to be able to free my scope ! lol >:D
Pehtoori:
--- Quote from: tiagobaracho on February 02, 2014, 06:24:17 pm ---Me too.. i cant donwload..... Please send it to www.yousendit.com it works great
I am Just waiting for it to be able to free my scope ! lol >:D
--- End quote ---
Try again now, should be up
if not:
https://www.hightail.com/download/elNKUXV1dzg5bEJ2TzhUQw
tiagobaracho:
--- Quote from: Pehtoori on February 02, 2014, 06:52:32 pm ---
--- Quote from: tiagobaracho on February 02, 2014, 06:24:17 pm ---Me too.. i cant donwload..... Please send it to www.yousendit.com it works great
I am Just waiting for it to be able to free my scope ! lol >:D
--- End quote ---
Try again now, should be up
if not:
https://www.hightail.com/download/elNKUXV1dzg5bEJ2TzhUQw
--- End quote ---
yesssssssssssss o got it now !!!!
Please check if i am right..
all i need to do is :
1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive.
2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. All buttons will unlight
3- insert the USB stick into the front panel.
4- Wait for the end of the firmware update
5 - all of the buttons on the front panel will be lit. Turn off the scope. Remove the pendrive
6 - check the new firmware version
7 - Connect to USB cable to PC and open up Ultra Sigma Software
8 - Send the *IDN? command. and get the keys back.
9 - write the keys to the HxD editor and get the final serial and input on the DS2072a
Is that right ? If i understood correctly..
Thanks
np:
--- Quote from: tirulerbach on February 02, 2014, 03:03:20 pm ---
--- Quote from: zombie28 on February 01, 2014, 09:25:36 pm ---You can use either my first firmware patch (https://mega.co.nz/#!FFk10SCY!UuWPXyqZwmca00pa2clOth1ryh1Z-AAgJg2yibfoUw0) with old keygen (riglol.3owl.com) or my newest patch from the post above with the new tirulerbach's keygen (if he decides to publish it).
--- End quote ---
Decided: https://mega.co.nz/#!qAkUkTZB!XG12bUKhIz4CmQt6DbBnGRMvEe5AvUjEaBxi4R03tw8 ;)
--- End quote ---
Just another generator that I quickly wirte (a bit ugly) as I received my DS2072A yesterday :) (before catching this message of course)
https://mega.co.nz/#!AcB11JAK!cHpnLrRwE2xJwz-ryTE6-zCXEgfmqlPEMj6AbaBzNmc
Usage : ./riglol-np DSHH 'RIGOL TECHNOLOGIES,DS2072A,DS2D123456789,020084001000........'
This should work as I can verify signed keys based on zombie28 code.
@zombie28, it will be cool if you can share the boot trick (magic buttons tricks), and how to boot from the network (inject ldr / kernel) and other stuff like compiled blackfin IDA plugin.
Riglol+
zombie28:
--- Quote from: np on February 02, 2014, 07:24:42 pm ---Usage : ./riglol-np DSHH 'RIGOL TECHNOLOGIES,DS2072A,DS2D123456789,020084001000........'
--- End quote ---
Don't use DSHH option code with the new DS2kA keygen! This code is valid only for non-A models or firmware patched to use non-A license codes on DS2kA scopes. Take a look at tirulerbach's keygen for valid option codes.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version